MECABLITZ 50 AF-1 digital - Materiel.net
MECABLITZ 50 AF-1 digital - Materiel.net
MECABLITZ 50 AF-1 digital - Materiel.net
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Tip:<br />
If you do not necessarily need the full guide number and maximum flash range<br />
of the flash unit, you can leave the zoom reflector at the position for the shortest<br />
focal length of the zoom lens. This will provide full light coverage of the picture<br />
and eliminate the need to continually adjust it to the focal length of the lens.<br />
Example:<br />
You use a zoom lens with a focal length range of 35 mm to 105 mm. In this<br />
case, you set the position of the main reflector of the flash unit to 35 mm.<br />
Resetting to auto-zoom<br />
• Touch the shutter release to begin a data transfer between the flash unit and<br />
the camera.<br />
Zoom<br />
☛ ☛<br />
8,7 m Zoom <strong>50</strong> mm<br />
☛<br />
• Press the button combination „Select“ until<br />
„M.Zoom“ appears flashing next to the zoom<br />
position (mm).<br />
• Press the button + until the 105 mm position<br />
has been exceeded. The flashing<br />
display „M.Zoom“ changes to „Zoom“ (=<br />
auto-zoom mode) and the zoom position<br />
of the main reflector � is automatically<br />
adjusted to the lens focal length.<br />
The setting takes effect immediately.<br />
After about 5 seconds the display stops flashing and the setting is saved automatically.<br />
☞ The return from manual zoom mode to auto-zoom mode also occurs if<br />
the flash unit is switched on again with the main switch �.<br />
Wide-angle diffuser<br />
With the wide angle diffuser �, focal lengths of<br />
12 mm or more can be illuminated (35 mm format).<br />
Pull the wide-angle diffuser � out from the main<br />
reflector as far as it will go, and then release it. The<br />
wide-angle diffuser � automatically folds downwards.<br />
The main reflector � automatically moves to<br />
the required position. The distance readings and the zoom value are corrected<br />
to 12 mm on the display panel.<br />
☞ The automatic adjustment of the motor-zoom main reflector � is not<br />
activated if the wide-angle diffuser is in use.<br />
To insert the wide-angle diffuser �, turn it upwards 90° and push it all the way<br />
in.<br />
Mecabounce 58-90<br />
If the Mecabounce 58-90 (optional accessories, see 17) is fitted to the main<br />
reflector j of the flash unit, the main reflector is automatically guided to the position<br />
required. The distance data and zoom factor are corrected to 16 mm.<br />
☞ The automatic adjustment of the motor-zoom main reflector � is not<br />
activated if the Mecabounce is in use.<br />
☞ The simultaneous use of the wide-angle diffuser and the Mecabounce is<br />
not possible.<br />
101<br />
�