WMF 10

One cup
Double cup function
Teach-In-
programming
Operation
> Place a cup centrally below the two coffee spouts.
> Wait until the illuminated cross glows white.
> Press the button for large coffee or small coffee.
The corresponding quantity is filled into the cup.
Place the two cups close to one another below the two coffee spouts.
> Wait until the illuminated cross glows white.
> Press the double cup button .
It glows for 5 seconds
> During that time, press the button for a large or small coffee.
The corresponding quantity is filled into the cups.
With the Teach-In function, you can change the cup volumes according to your personal wishes. Up to
approx. 120 ml cup volume for the small coffee or up to approx. 165 ml for the large coffee can be set.
Coffee quantities below 50 ml do not give a satisfactory result.
> Place a cup of any size centrally below the two coffee spouts.
> Wait until the illuminated cross glows white.
> Keep the button of that beverage pressed, for which you wish to change the cup volume
(large or small coffee).
The illuminated cross pulses white to start with, because the brewing process is starting. After 3
seconds, the illuminated cross flashes white to indicate that the Teach-In mode has been activated.
> Release the cup and keep an eye on the filling level.
> Press the button as soon as the desired quantity has been reached.
The illuminated cross flashes white 3 times to confirm successful programming.
18
GB