Instruction Book Manual de Insctrucciones Manuel d ... - Janome

Inserting the bobbinzeqz Place the bobbin q in the bobbin holder w with thethread running off as illustrated.q Bobbinw Bobbin holdere End of threadwxrx Guide the thread into the notch r on the frontside of the bobbin holder. Draw the thread to theleft, sliding it between the tension spring blades.r Front notcht Springtcc Continue to draw the thread lightly until thethread slips into notch y. Pull out about 15 cm(6˝) of thread.yy Side notchvuov Attach the hook cover plate i. Check the threadingby referring to the chart o shown on the hook coverplate.u Bobbin threadi Hook cover plateo Threading charti22