Multilingual Version English Français Español 日本語 Deutsch ...

5.2.3 SYSTEM INFOMAIN MENUSYSTEMACCOUNT BAUD RATE 2400 TOOLS HOST ID 000SYSTEM INFO R.E.T.R 5 BACKUP DATA AUTO KEY LOCK(S) NEVER BACKUP LOG CLEAR HDD HDD-0 RESET DEFAULTSUBMITREMOTE CONTROL ID 000EXIT1) BAUD RATESERIAL TYPEVIDEO FORMATRS485NTSCVERSION 1010-1005-1006-1007Set the baud rate of the DVR (2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 115200).2) HOST IDSet the ID of the DVR (000 ~ 254).3) R.E.T.RSelect the timeout in minute after which the R.E.T.R. function will be activated (3 / 5 / 10 / 30).4) AUTO KEY LOCK(S)Set the time-out in second after which the key lock function is activated (NEVER / 30 / 60 / 120).5) CLEAR HDDSelect the HDD you want to clear, and click “YES” to confirm or “NO” to cancel.It’s recommended to clear all data in the hard disk when:• It’s the first time to use this DVR to ensure the recorded data are not mixed with other data previously saved in thesame hard disk.• The DVR firmware is upgraded for the system to work more stably. Before clearing all HDD data, please rememberto make video backup.• DVR date and time are changed accidentally when the recording function is activated. Otherwise, the recordeddata will be disordered and you will not be able to find the recorded file to backup by time search.6) RESET DEFAULTClick “SUBMIT” to reset all settings as default, and select “YES” to confirm or “NO” to cancel. The DVR willreboot after reset.7) REMOTE CONTROL IDThis function is available when users need to control two or more DVRs with one IR remote controller. TheID set here is used to identify the DVR the remote controller is going to control. Please also read the usermanual of the IR remote controller for details.8) SERIAL TYPEHere shows the serial type of the DVR (RS-485).9) VIDEO FORMATHere shows the information of the DVR video format (NTSC / PAL).10) VERSIONHere shows the firmware version information.23