Multilingual Version English Français Español 日本語 Deutsch ...

REMOTE OPERATIONSimultaneous PlaybackDownload / CancelFunctionDescriptionTo view the backup images simultaneously when the downloadprocess is in progress, select the checkbox “Simultaneous Playback”.You will see the backup images while the images are beingdownloaded to the PC or notebook.To simply backup images without previewing, deselect the checkbox“Simultaneous Playback”. You will only see a message box indicatingthe total time needed, the current status and the saving location.Click “Download” to start or “Cancel” to discard the video backup.Firmware UpgradeThis function is used to grade your DVR for function scalability.Note: Before using this function, make sure you have the correct upgrade files provided by your installeror distributor.Step1: Click “Step2: Click “”, and select the IP address of your device in the address book.” to show the upgrade page, “Update Server”.Step3: Click “Add” to browse to the upgrade files.Step4: Click “Upgrade Firmware” to start firmware upgrade.Note: It takes a few minutes to finish the upgrade process. Do not disconnect the power during firmwareupgrade, or the upgrade may be failed. The device will reboot after the upgrade.Step5: Select the IP address of the device and click “” again to check if the firmware is upgraded.6.1.4. E-MapVideo Viewer is also a Central Management System (CMS) software, which allows network device control &management for up to 16 devices simultaneously.52