Multilingual Version English Français Español 日本語 Deutsch ...

MAIN MENU7) RECORD CONFIGClick “SETUP” to enter the setting page individually for manual record, event record and timer record.For details, please refer to “5.1.1 GENERAL” at page 19.5.4.7 DEVICESADVANCED CONFIGCAMERA CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 DETECTION DEVICE PTZ ALERT ID 00NETWORK PROTOCOL NORMAL DISPLAY RATE 2400 RECORDDEVICESDCCSIVSNOTIFYEXIT1) DEVICE2) IDFor the PTZ camera, select “PTZ”.For a zoom lens control camera:The DVR will detect it automatically and display its model number here.To configure the parameters for a zoom lens control camera, please refer to “5.4.8 DCCS” at page 37. Different zoom lens controlcameras might have different parameter settings. For details, please refer to their own user manuals.Click the current value to set the ID number (0 ~ 255) for the connected PTZ camera if necessary.Make sure the ID setting of the camera is the same as the setting here, or the DVR will not be able to controlthe device.Note: To know the default ID of the PTZ camera, please refer to its user manual.3) PROTOCOLSelect NORMAL (our protocol), P-D (PELCO-D) or P-P (PELCO-P) protocol.4) RATESelect the baud rate for the connected PTZ camera (2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 115200).Make sure the baud rate setting of the camera is the same as the setting here, or the DVR will not be able tocontrol the device.Note: To know the default baud rate of the PTZ camera, please refer to its user manual.36