1 - SINGER Futura Support

TURNING A SQUARE CORNER1. To turn a square corner 5/8" (16 mm) from the fabric edge,push the needle stop position selector switch to stop theneedle to its lowest position. Start and stop the machinewhen reaching the cornering guide as shown. Raise thepresser foot and turn fabric.Needle stop positionselector switchTouche de positiond’arrêt d’aiguilleInterruptor de posicionde aguja parada2. New stitching line will align with 5/8” (16 mm) seam guideon side of needle plate. Lower the presser foot and beginstitching in new direction.Cornering guideGuide d’angleGuía de esquinasREVERSE STITCHIt is a good idea to begin or end seams with 3 to 5 stitches inreverse to reinforce the seams in order to prevent unraveling.As long as you are pushing the reverse stitch button, themachine will continue to feed the fabric backwards.Reverse stitch buttonInterrupteur couture arrièreinterruptor de puntadas hacia atrás34