Samsung NV11 (EC-NV11ZBBA/FR ) - Manuel de l'utilisateur 7.94 MB, pdf, Anglais

Setup menu
[OSD set]
You can check shooting (Recording mode) and displayed image (Play back
mode) information.
Full
Basic
Hide
LCD Save
OSD Set
OSD Set
File
Language
Date&Time
Exit:BACK
[Recording mode menu]
[Full] : When the smart button is touched, the icons will be enlarged and
OSD will be displayed.
[Basic] : When the smart button is touched, the icons will be enlarged and
OSD will not be enlarged.
[Hide] : If the camera doesn't operate for about 3 seconds, all OSD will
disappear. When the shutter is pressed down or half way down, the
shutter speed and auto focus frame will display. OSD may display by
using the camera buttons except for the shutter button.
[LCD save] : If the camera is not used for about 30 seconds, the power and
camera status lamps blink and the LCD monitor turns off.
(LCD save is only applied to the Recording mode menu.)
Full
Basic
Hide
OSD Set
OSD Set
File
Language
Date&Time
Exit:BACK
[Play back mode menu]
[ File name ]
This function allows the user to select the file naming format.
[Series] : New files are named using numbers that
Series
OSD Set
follow the previous sequence, even when
Reset
OSD Set
File
a new memory card is used, or after
Language
formatting, or after deleting all pictures.
Date&Time
[Reset] : After using the reset function, the next file
Exit:BACK
name will be set from 0001 even after
formatting, deleting all or inserting a new
memory card.
- The first stored folder name is 100SSCAM, and the first file name is
SNV10001.
- File names are assigned sequentially from SNV10001 SNV10002 ~
SNV19999.
- The folder number is assigned sequentially from 100 to 999 as follows:
100SSCAM 101SSCAM ~ 999SSCAM.
- The files used with the memory card conform to the DCF (Design rule for
Camera File systems) format.
- File names assigned in the Biz mode, will be set SB1ZXXXX
60