Sony TA-VE800G - TA-VE800G Consignes d’utilisation

Settings and Adjustments
DEMO:
This display mode activates a programme that explains
the various functions of the amplifier. Please note that
when the programme is running it replaces previously
stored data (such as surround sound parameters) with
data from the programme. Therefore, you should only
use the DEMO mode when no data has been stored or
when rewriting existing data does not matter.
Click START to activate the programme. To stop the
programme, click the button on the remote two or three
times or turn off the amplifier.
IR OUTPUT:
When it is set to OFF, the IR signals are only output
from the IR OUT jack on the rear panel. No IR signals
will be output from the IR repeater on the front panel.
When the IR OUTPUT is set to OFF, “IR OFF” appears
in the main menu.
Normally, IR OUTPUT should be set to ON.
Adjusting the Position of the
On-Screen Display
The graphic position function (GRAPHIC POSITION)
lets you make fine adjustments to the overall position
of the on-screen display control panel.
1 Click FUNCTION in the main menu.
The FUNCTION SELECT menu appears.
2 Click TV SET.
3 Click GRAPHIC POSITION SET.
The position adjustment screen appears.
TV IR SET
TV MONITOR SET
To return to the main menu
Click EXIT.
To go to the previous menu
Click RETURN.
GRAPHIC POSITION
RETURN
SET
EXIT
The position adjustment screen appears.
V
B
b
v
EXIT
Click the boarders to adjust the position so you
can just see the top, bottom, right and left edges of
the boarder.
4 Click EXIT.
To return to the main menu
Click EXIT.
To go to the previous menu
Click RETURN.
39 GB