Aggregati Aggregates Aggregate Agrégats Agregados - HSD

4.3 Cutting tools
4.3.1 Flange and anti-rotation pin
1. Block the shaft (Ref. A) using the appropriate spanner (Ref. B).
2. Unscrew the flange (Ref. C).
MC S.r.l. © - 0104h00gb.fm110208
4 Fitting tools
3. Fit the blade (Ref. D) onto the spindle making sure that hole (Ref. E) corresponds with the
anti-rotation pin.
4. Screw up the flange (Ref. C) until it locks.
Always use the anti-rotation pin to block the tool. Do not use a circular blade tool that
does not have a hole for the anti-rotation pin.
4.3.2 4 torx screw mounting
B
A
B
A
D
1. Block the shaft (Ref. A) using the appropriate spanner (Ref. B).
D
C
E
C
E
33
GB