Aggregati Aggregates Aggregate Agrégats Agregados - HSD

6.3 Greasing
6.3.1 Greasing procedure
A Grease Pump.
B Grease hole.
Procedure:
A
1. Rest the aggregate on the work-bench
6 Maintenance
2. Insert the pump into the lubricating nipple and pump in the quantity of lubricant necessary for
the aggregate in your possession.
If the aggregate remains out of use for more than 12 months, the grease should be partially
renewed by regreasing (3 ÷ 5 actions of the grease pump supplied) and the aggregate run
for 10min. at 5000 rpm.
MC S.r.l. © - 0106h00gb.fm110208 45
B
GB