Návod na montáÏ a obsluhu UzstÇd¥‰anas un ... - Hörmann

ENGLISH2. Press the button you wish to programmeon the hand transmitter for at least 1second. The distance between thetransmitter and the receiver should beat least 1 m.3. Once the programming has been completed,the red LED on the receiverstarts flashing rapidly.4. Release the button on the handtransmitter.Once the flashing stops, the receiver isready for operation.Test the function!Note:If programming is not carried out within30 seconds of pressing the ”P” button,the red LED on the receiver will extinguish.7 Programming the HE2 receiver(see Fig. 2)Programming for channel 1:1. Briefly press button "P” (programmingbutton) on the receiver once – the redLED starts to flash slowly.2. Press the button you wish to programmeon the hand transmitter for at least 1second. The distance between thetransmitter and the receiver should beat least 1 m.3. Once the programming has been completed,the red LED on the receiverstarts flashing rapidly.4. Release the button on the handtransmitter.Once the flashing stops, the receiver isready for operation.Test the function!Programming for channel 2:1. Press button "P” (programming button)on the receiver twice within 2 seconds– the red LED starts to flash, twice asslowly as for channel 1.2. Press the button you wish to programmeon the hand transmitter for at least 1second. The distance between thetransmitter and the receiver should beat least 1 m.3. Once the programming has been completed,the red LED on the receiverstarts flashing rapidly.4. Release the button on the handtransmitter.Once the flashing stops, the receiver isready for operation. Test the function!Note:If programming is not carried out within30 seconds of pressing the ”P” button,the red LED on the receiver will extinguish.11.2005 TR20A011-B RE13