Käyttöohje Bruksanvisning Instruction Manual FI SE EN

2.5 Installing the memorycard
The Photonav supports SD and MMC memorycards. Included with the package
is a 4 Gigabyte SD memorycard with 3DPhotonav preinstalled.
Install the memorycard to the navigator as follows:
1. Shut down the navigator from the Main Power switch.
2. Place the memorycard in the memorycard slot so
that the side with the picture (sticker) faces towards
the screen.
3. Press the memorycard into the slot until you hear
a clicking sound.
4. Start the device and wait for it to read the contents of the memorycard. This
might take a few minutes the first time you install it.
When you want to remove the memorycard from the device, press the card
inward until it bounces out a bit. You can then remove the card.
The device supports SD/MMC memorycards up to 4 Gigabytes in size.
12