Jahresbericht 2006 - Biba - Universität Bremen
Jahresbericht 2006 - Biba - Universität Bremen
Jahresbericht 2006 - Biba - Universität Bremen
Erfolgreiche ePaper selbst erstellen
Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.
Prof. Dr.-Ing. Gert Goch<br />
Division MAQ<br />
Metrology, Automation and Quality<br />
Science are elementary for production<br />
processes. In spite of focusing on this<br />
area, the division MAQ considers the products,<br />
the companies and the processes<br />
as holonic units. This results in a wide field<br />
of business activities with the thematic priorities<br />
being geared to the requirements<br />
of a sustainable production.<br />
Geometric Metrology: The measurement<br />
of geometric features is the center<br />
competence of the division MAQ. This<br />
area comprises of tactile and non-contact<br />
(including optical) measurement<br />
procedures. The spectrum covers the<br />
inspection of gear wheels as well as the<br />
laser measurement of surfaces and layer<br />
thicknesses in the micrometer range. The<br />
tasks vary from fundamental developments<br />
of new measurement procedures<br />
and sensors to the applied optimization<br />
of accuracy and measuring speed.<br />
Signal and Image Processing: This<br />
department deals with micro- and<br />
nano-measurement projects, such as the<br />
simulation and processing of scattered<br />
light images. The manufacturers of optics<br />
apply this kind of metrology for characterizing<br />
surfaces and for measuring<br />
roughness. Furthermore, the department<br />
is involved in the field of medical-technical<br />
research with projects like diagnosing<br />
Glaucoma by computer aided analysis<br />
and testing the intra-ocular pressure with<br />
an innovative measuring principle.<br />
Quality Management and In-Process<br />
Metrology: Quality management is<br />
essential within modern production. However,<br />
automotive engineering or micro<br />
production processes are often limited by<br />
the boundaries of possibility. Thus, mass<br />
production with a high process capability<br />
can only be achieved by an in-process<br />
metrology. Then, the process in action is<br />
controlled based on the measured data.<br />
For a process spanning quality management<br />
it is not sufficient to consider<br />
separate processing steps. Instead, the<br />
holonic process chain has to be analysed<br />
and modeled.<br />
Energy Systems: From more rational<br />
methods of using energy to innovative<br />
concepts for the augmented application<br />
of regenerative energy: The engagement<br />
in this department covers research in<br />
both new storage technologies as well as<br />
energy management of hybrid vehicles<br />
and power supply networks. This also<br />
includes monitoring, post mortem analysing<br />
and estimating life-times of wind<br />
generators and their gear boxes.<br />
Automation- and Information-Systems:<br />
This research area covers conventional<br />
technologies like CNC and PLC controlled<br />
robots and machine tools. Modern<br />
wireless systems based on BlueTooth<br />
and UMTS as well as RFID applications<br />
within logistics open up new production<br />
possibilities.<br />
Technical Service Center: The Center<br />
consists of a machine hall and laboratories.<br />
Numerous tasks related to research<br />
contracts or project co-operations are<br />
processed: From circuit design of prototypic<br />
devices to implementing complex<br />
equipment for automation purposes.<br />
Concerning education, the Center allows<br />
practical training and offers small and<br />
medium sized companies the possibility<br />
to read up on new technologies and to<br />
take qualified advice.<br />
Gert Goch<br />
17