deutsch - E-key

PIN no.: Control panel Mini PIN no.: Control panel Mini1 RS485B (terminal 1) 5 REL1C (relay contact 1)2 RS485A (terminal 2) 6 REL1NO (relay contact 2)3 +VCC (terminal 3) geschalten 7 IN1H (input H)4 - VCC (terminal 4) 8 IN1L (input L)9 +VCC (9V A/C power supply)10 -VCC (9V A/C power supply)Cable specification:Connecting the fingerprint scanner to the control panelekey® recommends using the following cable for the electrical connection between the fingerprint scanner and thecontrol unit:4-pin twisted pair (UTP and STP) cable as per DIN ISO 8482.e.g. LiYY 4 x 0.14 or LiYY 4 x 0.2521. Operating the system parts21.1 OPERATING THE FINGERPRINT SCANNERELEMENTS OF THE FINGERPRINT SCANNERFINGER RECESS: Pleaseplace your finger hereappropriatelyOPERATING VERSIONSFINGER TOUCHis a short movement (fast swipe) over the sensor areaof the fingerprint scanner. Required for theprogramming of the systemSymbolSENSOR:A image of your fingeris taken via this sensorarea.FINGER SWIPEPlace your finger in the finger recess and move itdown across the sensor applying a small amountof pressure and equal speed. (= swipe finger)With this function the contours of the finger are read. Inthis case you have to make sure that you use the devicecorrectly. You system will only work satisfactorily if youswipe your finger correctly. Read the following notes toensure correct operationSymbolFINGER SWIPE – NOTE ON CORRECT OPERATIONThe correct operation of the fingerprint scanner is your guarantee of the success functioning of thisproduct!FUNCTION OF THE FINGER SCANNING: Place your finger in the finger recess and move it down across thesensor applying a small amount of pressure and equal speed. (= swipe finger)Ensure that: The finger is positioned straight in the finger recess and thatthe whole length of the finger lies in the finger recess The finger does not stick out over the finger recess. Only thetop of the finger phlanax should be scanned by the sensor.The start position (sensor position) is thereby the crease ofthe top knuckle You only exert moderate pressure You swipe the finger over the sensor at moderate speed(duration of the swipe approx. 0.5-1s)17