ACHEMA Daily 2022 #2

36
ACHEMA DAILY #2 | TUESDAY, AUGUST 23, 2022
Instrumentation/Process Automation
Niederenergetischer Gammastrahlung
Edelstahl-Dichtemessstrecke
Inlinesense: Strahlenquelle und
Oszintillationsdetektor in einem
Bild: Berthold
PRO
Die Dichtemessstrecke Inlinesense
von Berthold vereint
Strahlenquelle und Oszintillationsdetektor
in einem System.
Durch den Einsatz niederenergetischer
Gammastrahlung,
speziell durch die Verwendung
des Isotopes Am-241, hängt die
Strahlungsabsorption nicht nur
von der Dichte, sondern auch
sehr stark von der Ordnungszahl
der Elemente im zu messenden
Produkt ab. Das Edelstahl-Messsystem
wird dauerhaft
an der Rohrleitung angeflanscht
und misst kontinuierlich
die Produktdichte von Säuren,
Laugen oder Suspensionen.
Das Produktrohr kann je
nach Anwendung auch mit einer
Innenwand-Auskleidung
geliefert werden.
cb
Berthold
Halle 11.1, Stand E88
ComSol
Process Communications Solutions
Convert your mobile device into a
full featured HART or FF communicator.
A modern replacement for expensive hand-helds
ProComSol, Ltd is a leader in the design and
manufacture of advanced, cost-effective, reliable
HART and FF communication products for the
Process Control marketplace.
+1 216 221 1550 sales@procomsol.com
Visit us at ACHEMA,
Hall 11.0, Booth E14, FieldComm Group
Hazardous area options available for
Windows and Android!
procomsol.com
DEVICE
CONFIGURATIONS
Cloud features!
Raman Process Analyzer
Raman Analyzer Offers Rapid Results
This analyzer is suitable for process monitoring in a variety of applications
The Thermo Scientific Ramina
Process Analyzer (photo) offers
non-destructive and continuous
analysis without the need
for sample preparation, with
rapid system setup and deployment
in as little as 15 minutes
to generate spectral data on
target analytes within seconds.
This easy-to-use system is designed
to eliminate the complexity
of performing Raman
spectroscopy measurements,
Level Measurement
Highest Safety Standards for Filling Level
An end-to-end automation solution from the sensor to the cloud
Using the name JSP ( Jumo
Safety Performance), Jumo has
already been bundling the
company‘s expertise in the SIL
(Safety Integrity Level) and PL
(Performance Level) fields for
years. Now the JSP portfolio is
being expanded to include another
important measurand —
it enables the reliable detection
and measurement of process-critical
point levels and
filling levels for liquids. Jumo
offers solutions for the measuring
point up to SIL 2 according
to IEC 61508.
This is a system solution based
on the products of the Jumo
Nesos series (photo) that is
Source: Thermo Fisher Scientific
making the technique accessible
to all levels of user experience
while maintaining high
precision and accuracy. The
compact system utilizes a
range of patented probes to
maximize the speed and sensitivity
of results, enabling fully
automated in situ measurements
to calculate concentrations
in a reaction vessel.
The Ramina Process Analyzer
offers a rapid and easy-to-use
Source: Jumo
alternative to offline manual or
automated wet chemistry testing,
and is simpler to install
and use compared to traditional
Raman process monitoring
systems, says the company
Ramina comes with everything
the user needs to start collecting
data, including a Raman
spectrometer and fiber optic
probe, as well as a portable
monitor, mouse, keyboard and
laser safety goggles. Factory
calibration ensures the Ramina
system is ready to use without
delay, and its solid-state construction
offers long-term stability,
meaning users can enjoy
continuous, highly accurate
measurements without frequent
calibration. Users can
also use multiple systems in
parallel to test different reaction
vessels simultaneously, or
combine a number of probes in
one vessel to take multiple
samples.
ond
Thermo Fisher Scientific
Hall 4.1, Stand E27
available in various expansion
stages to suit the user‘s
requirements. Flexible options
are available including the SILqualified
sensor with all
required safety-related characteristic
values, SIL-certified
sensors, and the certified
measuring point. Qualification
and certification were carried
out by an independent test facility
so that a solid basis has
been laid for safety-critical applications.
The JSP complete solution in
the „filling level“ field can also
reliably detect line faults, such
as short circuits and cable
breaks, ranging from the sensor
to the actuator. Solutions
can also be implemented in
combination with applications
in explosion-protected areas
(intrinsically safe [Ex i] and
flameproof enclosure [Ex d])
as well as in shipbuilding. As a
result, possible applications
include the field of liquid gas
and hydrogen, steam boilers,
bioreactors, or solvent purification
plants.
The product range under the
JSP brand now includes complete
solutions for temperature,
pressure and filling level. In addition
to product and solution
developments, JSP focuses on a
high level of consulting expertise.
Jumo‘s SIL skills network is
available to offer transnational
help with its comprehensive expertise.
The combination of
high-quality products and comprehensive
expertise makes JSP
a clever, complete solution for
different industries and applications.
ond
Jumo
Hall 11.1, Stand E41