Download the catalogue (PDF) - Anordica

Low-carbon galvanized wire
for muzzle (muselet)
manufacture
TU 1) 14-4-1128-81
Application area:
The wire is intended for muzzle manufacture
(wire bridle on the corks of champagne bottles)
using cold-bending technique.
The finished wire is heat-treated and hot-dip
galvanized.
Chemical composition is given in Table 1.
Mechanical properties
Severstal-metiz, Product Catalogue
LOW-CARBON GALVANIZED WIRE FOR MUZZLE (MUSELET) MANUFACTURE
Wire diameter, mm Tolerance on diameter, mm
Packing:
Tensile strength, N/mm 2 ,
not exceeding
Elongation δ 100 , %,
not less than
1.0 +/- 0.02 290 – 470 15
The wire is manufactured in rosette coils with a
weight of up to 800 kg.
The wire is shipped in bundles of a weight of 45 kg,
which are packed into a corrugated cardboard box
with a total weight of up to 1000 kg.
1) TU = Technical Specification
Lowcarbon
steel wire
Table 10.
© Severstal-metiz, 2006. © Anordica AB, 2006. Illustrations/photos are just examples. The package design can be different depending on technical specifications and customer order. April 2006, EN3
Table 6.
13