Download the catalogue (PDF) - Anordica

Severstal-metiz, Product Catalogue
STEEL WIRE FOR BUILD-UP WELDING
Steel wire for build-up
welding
GOST1) Ch, V
10543-98
Application area:
The wire is intended for machine build-up welding.
The wire is made of the steel grade 30CrMnSiA.
Chemical composition is given in Table 1.
Diameters and tolerances:
Wire
diameter,
mm
1.2
1.6
2.0
2.4
2.5
3.0
3.2
4.0
5.0
6.0
Packing
Diameter
tolerance,
mm
+0.04
+0.06
Table 66.
Cold-drawn wire is manufactured without heat-treating.
The wire surface should have no rust, tears, ridges or
scales. The wire surface should be clean and plain,
soap marks are possible. The wire should stand not
less than three twists.
∅, mm Type Weight, kg Inside ∅, mm Supplemental Packing
0.24 – 0.8 Coils 1 – 7 250 Non woven fabric and polymer film
or crepe paper
1.6 – 6.0 Coils 80 550
1) GOST = Russian State Standard
Medium- &
high-carbon
steel wire
Table 67.
© Severstal-metiz, 2006. © Anordica AB, 2006. Illustrations/photos are just examples. The package design can be different depending on technical specifications and customer order. April 2006, EN3
70