Download the catalogue (PDF) - Anordica

Severstal-metiz, Product Catalogue
LOW CARBON WIRE 10, 10KP, 15
Lowcarbon
steel wire
Low carbon wire 10, 10kp, 15
TU 1) 14-4-132-88 V
The wire of Ø 1.5 – 6.0 mm is made from steel grades
10 and 10KP.
The wire of Ø 1.8 and 3.0 mm – from steel grade 15.
Chemical composition is given in Table 1.
Mechanical properties
Wire diameter,
mm
1.5
1.7
Packing
∅, mm Type Weight, kg Inside ∅, mm Packing
1,5 Coils
300
not less than
exceeding
Coils 60
450
1,5
1) TU = Technical Specification
Diameter
tolerance
Tensile strength,
N/mm 2
not less than
430
Elongation
5%
not less than
Table 37.
Number of
twists,
not less than
1.8 -0.06
780 7
2.0
2.95 -0.05 6
3.0 -0.06
3.5 -0.08 8
9
3.95 -0.05
430
4.0 -0.08 5
4.4 -0.08
4.43 -0.05 9
5.0 -0.08
6.0 -0.08 5
The wire of interim diameters can be delivered on
customer’s demand.
Wire out-of-roundness should not exceed half of
diameter tolerance.
Table 38.
Covered with preservative oil
© Severstal-metiz, 2006. © Anordica AB, 2006. Illustrations/photos are just examples. The package design can be different depending on technical specifications and customer order. April 2006, EN3
3
The wire of diameter Ø 2.95, 3.0, 3.5, 3.95 and 4.0 mm
is shipped calibrated on customer’s demand with tensile
strength ranges 430 – 640 N/mm 2 without tests on
elongation and twists.
31