Download the catalogue (PDF) - Anordica

Carbon steel wire
for flexible shaft
TU 1) 14-4-121-72 V
Application area:
The wire is intended for manufacture of VAZ car’s
flexible shaft.
The wire of Ø 0.33; 0.38; 2.35 mm is made from
steel grades 45; 50, the wire of Ø 0.45 mm – from
steel grade 10.
Chemical composition is given in Table 1.
Mechanical properties
Wire diameter,
mm
*Comments: twisting of the wire of Ø 2,35 mm is done on the length of 100d.
Packing Table 103.
∅, mm Type Weight, kg
Severstal-metiz, Product Catalogue
Inside ∅,
mm
Packing
0.33
0.5 not less
0.38
0.45
Coils
Spools
2.0
2.0
than 8 kg
not less
Preservative oil,
paraffin paper + polyethylene
or fabric
2.35 3.0 than 50 kg
1) TU = Technical Specification
Diameter
tolerance
Tensile strength,
N/mm 2
CARBON STEEL WIRE FOR FLEXIBLE SHAFT
Numer of twists (on
the length of 76 mm)
not less than
0.33 +0.01
1850 – 2010 45
0.38 -0.005
1700 – 1930 45
0.45 ±0.01 740 – 1180 36
2.35 ±0.02 1240 – 1390 15*
Medium- &
high-carbon
steel wire
Table 102.
Relative elongation (on
the length of50 mm), %
not less than
© Severstal-metiz, 2006. © Anordica AB, 2006. Illustrations/photos are just examples. The package design can be different depending on technical specifications and customer order. April 2006, EN3
1,5
88