Download the catalogue (PDF) - Anordica

High strength
baling steel band
TU 1) 14-178-342-2000 Ch
Application area:
The band is intended for packing.
The band is made of steel grade 45. It is tempered and
has corrosion preventive phosphate-coating. On
customer’s demand it can be oiled.
Chemical composition is given in Table 1.
Band sizes and mechanical properties
Thickness,
mm
0.8 ± 0.10
1.0 ± 0.15
1.2 ± 0.20
1) TU = Technical Specification
Breadth,
mm
30 ± 1.0
Severstal-metiz, Product Catalogue
Tensile strength,
N/mm 2
HIGH STRENGTH BALING STEEL BAND
Relative
elongation, δ 4B , %
880 – 1130 Not less than
6.0
Camber
Not less than
5 mm on
each 1 m
Medium- &
high-carbon
steel wire
Table 72.
180 0 fold under
room temperature
Cracks observed
by the naked eye
are not allowed
Packing Table 73.
Sizes, mm Type Weight, kg Outside ∅, mm Inside ∅, mm Comments
0.8×30
1.0×30
1.2×30
Rolls 150 ± 20 1000 ± 20 300 ± 20 Band is shipped heat-treated
© Severstal-metiz, 2006. © Anordica AB, 2006. Illustrations/photos are just examples. The package design can be different depending on technical specifications and customer order. April 2006, EN3
73