Download the catalogue (PDF) - Anordica

Steel brush wire
TU1) Ch, O, V
14-4-933-78
Application area:
The wire is intended for steel brushes manufacture.
The wire is made from steel grades 35 – 85 with diameter
ranges: 0.20 – 1.5 mm. Tensile strength ranges:
1370 – 1960 N/mm 2 . The wire can be shipped harddrawn
and heat-treated V . Hard-drawn wire can be
bright or galvanized.
Chemical composition is given in Table 1.
Mechanical properties
Wire
diameter,
mm
∅ tolerance,
mm
0.20 – 0.30 +0.02 – 0.02
0.32 – 1.00 +0.03 – 0.03
1) TU = Technical Specification
Severstal-metiz, Product Catalogue
Tensile strength, N/mm 2 ,
not exceeding
Table 74.
annealed hard-drawn
1370 – 1960
1.10 – 1.50 +0.05 – 0.05 1370 – 1960 –
STEEL BRUSH WIRE
Medium- &
high-carbon
steel wire
Packing Table 75.
∅, mm Type Weight, kg Inside ∅, mm Comments
0.20 – 0.80 Ch Coils 20 – 80 200 – 550
0.8 – 1.50 Ch Spools 1000
0.36 – 0.75 O Coils 30 200
0.60 – 1.20 O Coils 80 350
1.20 – 1.50 O Coils 120 550
0.30 – 0.80 V Coils 10 – 60 200 – 370
Wire is shipped hard-drawn Ch
Wire is shipped hard-drawn
Packing: paraffin paper and packing fabric or
polymer film O
Shipped hard-drawn preservation – in half-woods
without packing, on customer’s demand –
without packing V
Heat-treated (carded) – packed hard-drawn V
© Severstal-metiz, 2006. © Anordica AB, 2006. Illustrations/photos are just examples. The package design can be different depending on technical specifications and customer order. April 2006, EN3
74