Download Sagem freesat+ manual
Download Sagem freesat+ manual
Download Sagem freesat+ manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5. FIRST INSTALLATION<br />
Once the recorder is physically connected, you need to go through the setup procedure to get your<br />
freesat HD and SD channels.<br />
1. Switch on your TV.<br />
2. Press the Standby button on your remote control to wake the recorder up from standby mode.<br />
3. The first installation screen should appear.<br />
Freesat Settings<br />
4. Press to start the installation.<br />
The recorder searches for the freesat satellite<br />
signal. Please wait until the recorder<br />
successfully detects it.<br />
5. If the detection fails, press to view the<br />
reception strength and quality of the satellite<br />
signal(s). Check the dish cable connections.<br />
When the signal level is satisfactory,<br />
press to resume the installation.<br />
If the level and quality of reception remain<br />
insufficient, contact your satellite installer.<br />
6. Enter your full postcode (without space) using<br />
the alphanumeric keys on the remote control.<br />
Example: to enter the letter S, press 4 times<br />
key 7.<br />
Use the<br />
character.<br />
key to delete an incorrect<br />
Press to continue.<br />
Note : the postcode is used to install local TV<br />
and radio channels.<br />
- 13 -
Change language