Batten luminaires - Alfred Pracht Lichttechnik GmbH

Batten luminaires
01with
reflectors
02
Tubular
luminaires
03
Basic Line
04
LED
05
Vandalism
06
Special
luminaires
07
Industrial
luminaires
08
Surface and recessed
luminaires
Listed with the
Deutsche Bahn AG
Protection class II acc. to VDE 0711/EN 60598
Ingress protection IP65
Dust-proof
Jet-proof
Shock (RC) 0.63*
230V/50 Hz
Captive cover plate 185 and push-fit cover. Retaining strap: Aids first-time installation
and when changing lamps, not suited for continuous duty.
152
Utmost energy efficiency owing to
modern pralux ® engineering!
10
Recessed luminaire
Spessart T8
for FL T8/26 mm
for panelled or closed ceilings,
and lighting channel systems
LED variants see page 91.
Easy mounting of cover and FL.
Befestigungslochabstand
Variable mounting variabel points
Type (VDE designation) Watt Inductive Compensated Electronic ballast L Weight
Art.-No. Art.-No. Art.-No. (mm) (kg)
Surface mounted and recessed luminaire with through-wiring 2 x 1.5 mm 2 , for lengthways installation, two panel width Modul 100 …
… with lamp cover made of acrylic glass (PMMA), with centering and retaining springs and narrow beam light distribution
PPR DD 112/1 LAT 185 PLEX 1 x 18 320 100 320 101 320 103 636±2 3.1 pralux ®
PPR DD 112/3 LAT 185 PLEX 1 x 36 320 230 320 231 320 233 1246±2 4.5 pralux ®
PPR DD 112/5 LAT 185 PLEX 1 x 58 320 360 320 361 320 363 1546±2 7.5 pralux ®
… with lamp cover made of polycarbonate (PC), with centering and retaining springs and narrow beam light distribution
PPR DD 112/1 LAT 185 MAK 1 x 18 320 110 320 111 320 113 636±2 3.1 pralux ®
PPR DD 112/3 LAT 185 MAK 1 x 36 320 240 320 241 320 243 1246±2 4.5 pralux ®
PPR DD 112/5 LAT 185 MAK 1 x 58 320 370 320 371 320 373 1546±2 7.5 pralux ®
… with lamp cover made of acrylic glass (PMMA), with centering and retaining springs, interior cross-blade louver and narrow beam light distribution
PPR DD 112/1 LAT 185 PLEX-QLR 1 x 18 321 100 321 101 321 103 636±2 3.5 pralux ®
PPR DD 112/3 LAT 185 PLEX-QLR 1 x 36 321 230 321 231 321 233 1246±2 5.0 pralux ®
PPR DD 112/5 LAT 185 PLEX-QLR 1 x 58 321 360 321 361 321 363 1546±2 8.0 pralux ®
… with lamp cover made of polycarbonate (PC), with centering and retaining springs, interior cross-blade louver and narrow beam light distribution
PPR DD 112/1 LAT 185 MAK-QLR 1 x 18 321 110 321 111 321 113 636±2 3.5 pralux ®
PPR DD 112/3 LAT 185 MAK-QLR 1 x 36 321 240 321 241 321 243 1246±2 5.0 pralux ®
PPR DD 112/5 LAT 185 MAK-QLR 1 x 58 321 370 321 371 321 373 1546±2 8.0 pralux ®
Extra cost:
Electronic ballast Dim 1–10V (add to el. bal. version) 685 004
Electronic ballast Dim Dali (add to el. bal. version) 685 005
Electronic ballast Industry (add to el. bal. version)) 36/58 685 006
Through-wiring 4 x 1.5 mm 2 , built-in 690 114
*Shock version 100 999
Housing: Polyester, white, fiberglass-reinf., essentially fully resistant to acids and alkalis.
Socket end pieces: One-piece push-fit lampholder end pieces made of PBT.
Socket: Two-slot plug-in socket with silver-plated contacts.
Lamp cover: Width 185 mm, Modul 100, two panel width, narrow beam, made
of acrylic glass (PMMA) or polycarbonate (PC, impact-resistant), prachtopal ® upon
request, with stainless steel centering and retaining springs.
Seals: Short, age-resistant silicone seals.
Electrical components: Low loss ballast B1 starter; electronic ballast;
through-wiring max. 7x 2.5 mm 2 .
Installation: Variable mounting points using the Pracht Clip System made of stainless steel.
Suited for ceiling and recessed mounting, pendant and horizontal wall mounting.
Note: Transverse installation, as well as other wattages and models available upon request.
For easier installation of our recessed luminaires we recommend using our recess frame, available as an accessory. See pages 170-171; replacement parts 166-168!
Areas of application: Swimming pools, changing rooms, washrooms and shower rooms, transport services, canopies, kitchens and hospitals.
L
154±2
77
±1
192±1
69