Batten luminaires - Alfred Pracht Lichttechnik GmbH

Batten luminaires
01with
reflectors
Protection Class II according to VDE 0711/EN 60598
Ingress protection IP65
Dust-proof
Jet-proof
230V/50 Hz
High push-fit lampholder (DDH):
Adjustment range for reflectors: 360°.
52
Listed with the
Deutsche Bahn AG
System Luminaire
Apollo DD T8
for FL T8/26 mm, single-lamp
with flat (DDF) push-fit lampholders
with high (DDH) push-fit lampholders
166±1
Housing: Slim, elegant, fully sealed luminaire housing made of white, fibreglassreinforced
polyester, essentially fully resistant against acids and alkalis.
Socket end pieces: One-piece push-fit lampholder end pieces made of PBTP,
impact-resistant.
Socket: Two-slot plug-in socket with silver-plated contacts.
Lamp cover: To be supplemented with accessories on page 53!
Seals: Short, age-resistant silicone seals.
Electr. comp.: Low loss ballast B1 starter; electronic ballast; through-wiring max. 7 x 2.5 mm 2 .
Installation: Variable mounting points with Pracht Clip System made of stainless
steel. Suitable for ceiling, pendant and horizontal wall mounting.
58
Befestigungslochabstand Variable mounting points variabel
64
L
64
DDH DDF
,Type (VDE designation) Watt Inductive Compensated Electronic ballast L Weight
Art.-No. Art.-No. Art.-No. (mm) (kg)
Individual luminaire without through-wiring, DDF with extremely flat push-fit lampholders
PPR DDF 200/1 1 x 18 160 500 160 501 160 503 634±2 1.7
PPR DDF 200/3 1 x 36 160 730 160 731 160 733 1244±2 2.2
PPR DDF 200/5 1 x 58 160 860 160 861 160 863 1544±2 3.5
Luminaire for individual and continuous mounting with through-wiring 2 x 1.5 mm 2 , DDF with extremely flat push-fit lampholders
PPR DDF 212/1 1 x 18 165 500 165 501 165 503 634±2 1.7
PPR DDF 212/3 1 x 36 165 730 165 731 165 733 1244±2 2.2
PPR DDF 212/5 1 x 58 165 860 165 861 165 863 1544±2 3.5
Luminaire for continuous mounting with through-wiring 4 x 1.5 mm 2 , DDF with extremely flat push-fit lampholders
PPR DDF 214/1 1 x 18 170 500 170 501 170 503 634±2 1.7
PPR DDF 214/3 1 x 36 170 730 170 731 170 733 1244±2 2.2
PPR DDF 214/5 1 x 58 170 860 170 861 170 863 1544±2 3.5
Individual luminaire without through-wiring, DDH with high push-fit lampholders, adjusting range 360°
PPR DDH 200/1 1 x 18 160 510 160 511 160 513 634±2 1.8
PPR DDH 200/3 1 x 36 160 740 160 741 160 743 1244±2 2.3
PPR DDH 200/5 1 x 58 160 870 160 871 160 873 1544±2 3.6
Luminaire for individual and continuous mounting with through-wiring 2 x 1.5 mm 2 , DDH with high push-fit lampholders, adjusting range 360°
PPR DDH 212/1 1 x 18 165 510 165 511 165 513 634±2 1.8
PPR DDH 212/3 1 x 36 165 740 165 741 165 743 1244±2 2.3
PPR DDH 212/5 1 x 58 165 870 165 871 165 873 1544±2 3.6
Luminaire for continuous mounting with through-wiring 4 x 1.5 mm 2 , DDH with high push-fit lampholders, adjusting range 360°
PPR DDH 214/1 1 x 18 170 510 170 511 170 513 634±2 1.8
PPR DDH 214/3 1 x 36 170 740 170 741 170 743 1244±2 2.3
PPR DDH 214/5 1 x 58 170 870 170 871 170 873 1544±2 3.6
Conductor cross-section 1.5 mm 2 = 10 A // Conductor cross-section 2.5 mm 2 = 16 A
Extra cost:
El. bal. Dim 1–10V (add to electronic ballast version) 685 004
El. bal. Dim Dali (add to electronic ballast version) 685 005
El. bal. Industry (add to electronic ballast version) 36/58 685 006
Non-silicone design 685 009
DDH
58
Luminaire must only
be operated with lamp
cover in place!
10
*
Areas of application: Lift lighting, pedestrian underpasses, ramp lighting, public transport, maintenance halls, hidden façade lighting, signage lighting (covered).
Wall mounted
90 90°-Stellung deg. position
197±1
97±1
DDF
Ceiling mounted
58
143±1
0°
135±1
Flat push-fit lampholder (DDF):
Restricted adjustment range.
*For versions with electronic ballast:
Identification
Luminaires must be operated
with covers in place!
Easy maintenance due to the large XXL cover, L = 360 mm
Additional item XXL cover: 692 210 (extra cost).
123±1
58