Batten luminaires - Alfred Pracht Lichttechnik GmbH

Batten luminaires
01with
reflectors
*
Protection Class II according to VDE 0711/EN 60598
Ingress protection IP65
Dust-proof
Jet-proof
Shock (RC) 0.63**
230V/50 Hz
24
Luminaire Imola T8
for FL T8/26 mm
single-lamp
Large compartment for continuous lighting layout.
Utmost energy efficiency owing to
modern pralux ® engineering!
Housing: Tubular housing, fully sealed, made of white, fiberglass-reinforced polyester,
essentially fully resistant against acids and alkalis.
Socket end pieces: One-piece socket ends made of PBT.
Socket: Two-slot plug-in socket with silver-plated contacts.
Lamp cover: Parabolic mirror reflector 090, all-round distribution,
made of prachtopal® (impact-resistant), fully adjustable.
Seals: Short, age-resistant silicone seals.
Electrical components: Low loss ballast B1 starter; electronic ballast;
through-wiring max. 7 x 2.5 mm 2 .
Installation: Variable mounting points with Pracht Clip System made of
stainless steel. Suitable for ceiling, pendant and horizontal wall mounting.
160±2
77±1
90°
105±1
Befestigungslochabstand
Variable mounting variabel points
Type (VDE designation) Watt Inductive Compensated Electronic ballast L Weight
Art.-No. Art.-No. Art.-No. (mm) (kg)
Individual luminaire with pralux ® parabolic mirror reflector, prachtopal ® , without through-wiring
PPR SR 100/1 PSR-PLEX-PO 090 1 x 18 490 110 490 111 490 113 630±2 2.4
PPR SR 100/3 PSR-PLEX-PO 090 1 x 36 490 240 490 241 490 243 1240±2 3.1
PPR SR 100/5 PSR-PLEX-PO 090 1 x 58 490 370 490 371 490 373 1540±2 4.1
Luminaire for individual and continuous mounting with pralux ® parabolic mirror reflector made of acrylic glass, prachtopal ® , with through-wiring 2 x 1.5 mm 2
PPR SR 112/1 PSR-PLEX-PO 090 1 x 18 491 110 491 111 491 113 630±2 2.4
PPR SR 112/3 PSR-PLEX-PO 090 1 x 36 491 240 491 241 491 243 1240±2 3.1
PPR SR 112/5 PSR-PLEX-PO 090 1 x 58 491 370 491 371 491 373 1540±2 4.1
Luminaire for continuous mounting with pralux ® parabolic mirror reflector made of acrylic glass, prachtopal ® , with through-wiring 4 x 1.5 mm 2
PPR SR 114/1 PSR-PLEX-PO 090 1 x 18 492 110 492 111 492 113 630±2 2.4
PPR SR 114/3 PSR-PLEX-PO 090 1 x 36 492 240 492 241 492 243 1240±2 3.1
PPR SR 114/5 PSR-PLEX-PO 090 1 x 58 492 370 492 371 492 373 1540±2 4.1
Extra cost:
El. bal. Dim 1–10V (add to electronic ballast version) 685 004
El. bal. Dim Dali (add to electronic ballast version) 685 005
El. bal. Industry (add to electronic ballast version) 36/58 685 006
Cable entry at the side 691 150
Cable entry at the ceiling side 691 151
**Shock version 100 999
10
*For versions with electronic ballast:
Identification
Luminaires must be operated
with covers in place!
Variants: For covers with louvers please complete basic models Avus, Monza, Monza-LBW with accessories!
Areas of application: Car washes, chemical industry, heavy industry, auto repair workshops, maintenance halls, gardening centers,
food industry e.g. dairies, high chemical exposure level, lighting height of 3–7 meters.
Standard mounting clip – cable entry ceiling side or from the side.
L