Batten luminaires - Alfred Pracht Lichttechnik GmbH

Batten luminaires
01with
reflectors
*
Protection Class II according to VDE 0711/EN 60598
Ingress protection IP65
Dust-proof
Jet-proof
Shock (RC) 0.63**
230V/50 Hz
36
Luminaire Santorini T8
for FL T8/26 mm
with push-fit lampholders, single-lamp
Utmost energy efficiency owing to
modern pralux ® engineering!
10
Housing: Tubular housing, fully sealed, made of white, fiberglass-reinforced polyester,
essentially fully resistant against acids and alkalis.
Socket end pieces: One-piece push-fit lampholder end pieces made of PBT, impact-resistant.
Socket: Two-slot plug-in socket with silver-plated contacts.
Lamp cover: Parabolic mirror reflector 090, all-round distribution, made of acrylic
glass (PMMA) or polycarbonate (PC), impact-resistant, fully adjustable.
Seals: Short, age-resistant silicone seals.
Electrical components: Low loss ballast B1 starter; electronic ballast;
through-wiring max. 7x2.5 mm 2 .
Installation: Variable mounting points with Pracht Clip System made of stainless steel.
Suitable for ceiling, pendant and horizontal wall mounting.
160±2
77±1
90°
105±1
Befestigungslochabstand
Variable mounting variabel points
Type (VDE designation) Watt Inductive Compensated Electronic ballast L Weight
Art.-No. Art.-No. Art.-No. (mm) (kg)
Individual luminaire with pralux ® parabolic mirror reflector 090 made of acrylic glass (PMMA), with centering and retaining springs, without through-wiring
PPR DD 100/1 PSR-PLEX-IG 090 1 x 18 480 100 480 101 480 103 636±2 2.4
PPR DD 100/3 PSR-PLEX-IG 090 1 x 36 480 230 480 231 480 233 1246±2 3.1
PPR DD 100/5 PSR-PLEX-IG 090 1 x 58 480 360 480 361 480 363 1546±2 4.1
Luminaire for individual and continuous mounting with pralux® parabolic mirror reflector 090 made of acrylic glass (PMMA), w. centering and retaining springs with through-wiring 2 x 1.5 mm 2
PPR DD 112/1 PSR-PLEX-IG 090 1 x 18 481 100 481 101 481 103 636±2 2.4
PPR DD 112/3 PSR-PLEX-IG 090 1 x 36 481 230 481 231 481 233 1246±2 3.1
PPR DD 112/5 PSR-PLEX-IG 090 1 x 58 481 360 481 361 481 363 1546±2 4.1
Luminaire for continuous mounting with pralux ® parabolic mirror reflector 090 made of acrylic glass (PMMA), w. centering and retaining springs w. through-wiring 4 x 1.5 mm 2
PPR DD 114/1 LB PSR-PLEX-IG 090 1 x 18 482 100 482 101 482 103 636±2 2.4
PPR DD 114/3 LB PSR-PLEX-IG 090 1 x 36 482 230 482 231 482 233 1246±2 3.1
PPR DD 114/5 LB PSR-PLEX-IG 090 1 x 58 482 360 482 361 482 363 1546±2 4.1
Individual luminaire with pralux ® parabolic mirror reflector 090 made of impact-resistant polycarbonate (PC), with centering and retaining springs, without through-wiring
PPR DD 100/1 PSR-MAK-IG 090 1 x 18 480 110 480 111 480 113 636±2 2.4
PPR DD 100/3 PSR-MAK-IG 090 1 x 36 480 240 480 241 480 243 1246±2 3.1
PPR DD 100/5 PSR-MAK-IG 090 1 x 58 480 370 480 371 480 373 1546±2 4.1
Luminaire for individual and continous mounting with pralux ® parabolic mirror reflector 090 made of impact-resistant polycarbonate (PC), with through-wiring 2 x 1.5 mm 2
PPR DD 112/1 PSR-MAK-IG 090 1 x 18 481 110 481 111 481 113 636±2 2.4
PPR DD 112/3 PSR-MAK-IG 090 1 x 36 481 240 481 241 481 243 1246±2 3.1
PPR DD 112/5 PSR-MAK-IG 090 1 x 58 481 370 481 371 481 373 1546±2 4.1
Luminaire for continuous mounting with pralux ® parabolic mirror reflector 090 made of impact-resistant polycarbonate (PC), with centering and retaining springs, with DV 4 x 1.5 mm 2
PPR DD 114/1 LB PSR-MAK-IG 090 1 x 18 482 110 482 111 482 113 636±2 2.4
PPR DD 114/3 LB PSR-MAK-IG 090 1 x 36 482 240 482 241 482 243 1246±2 3.1
PPR DD 114/5 LB PSR-MAK-IG 090 1 x 58 482 370 482 371 482 373 1546±2 4.1
Extra cost:
El. bal. Dim 1–10V (add to electronic ballast version) 685 004
El. bal. Dim Dali (add to electronic ballast version) 685 005
El. bal. Industry (add to electronic ballast version) 36/58 685 006
**Shock version 100 999
Variants: For covers with louvers please supplement basic types Herkules! Note: For replacement covers, see page 39!
Areas of application: Food industry, beverage industry, dairies, heavy industry, steel industry, auto repair workshops, maintenance halls,
gardening centers and greenhouses, lighting height of 3–7 meters.
With mirrored ring dark-light louvers. With white cross blade louvers.
*For versions with electronic ballast:
Identification
Luminaires must be operated
with covers in place!
L