Batten luminaires - Alfred Pracht Lichttechnik GmbH

Batten luminaires
01with
reflectors
Protection Class II according to VDE 0711/EN 60598
Ingress protection IP65
Dust-proof
Jet-proof
230V/50 Hz
54
Only operate luminaire
with lamp cover in place!
System Luminaire
Apollo T5
10
*
for FL T5/16 mm
with push-fit lampholder, single-lamp
Only supplied with accessories on page 55!
Caution! Note burn-in recommendations
issued by
the lamp manufacturer!
Housing: Slim, elegant, fully sealed luminaire housing made of white, fibreglassreinforced
polyester, essentially fully resistant against acids and alkalis.
Socket end pieces: One-piece push-fit lampholder end pieces made of PBTP,
impact-resistant, with stainless steel clip.
Socket: Two-slot plug-in sockets.
Lamp cover: To be supplemented with accessories on page 55!
Seals: Short, age-resistant silicone seals.
Electrical components: Electronic ballast; through-wiring max. 7x 2.5 mm 2 .
Installation: Variable mounting points with Pracht Clip System made of stainless
steel. Suitable for ceiling, pendant and horizontal wall mounting.
Befestigungslochabstand
Variable mounting points
variabel
Type (VDE designation) Watt 2 x1.5 mm 2 4x1.5 mm 2 El.bal. Industr. 4x1.5 mm 2 L Weight
Art.-No. Art.-No. Art.-No. (mm) (kg)
Luminaire for individual and continuous mounting with electronic ballasts, two connection covers and through-wiring, with one-piece push-fit lampholders – T5
PPR DD T5 21./41 (HE) 1 x 14 5165 523 5170 523 597±2 1.8
PPR DD T5 21./43 (HE) 1 x 21 5165 253 5170 253 897±2 2.2
PPR DD T5 21./45 (HE) 1 x 28 5165 823 5170 823 1197±2 2.7
PPR DD T5 21./47 (HE) 1 x 35 5165 983 5170 983 1497±2 3.7
PPR DD T5 21./21 (HO) 1 x 24 5165 513 5170 513 597±2 1.8
PPR DD T5 21./23 (HO) 1 x 39 5165 743 5170 743 897±2 2.2
PPR DD T5 21./25 (HO) 1 x 54 5165 873 5170 873 5170 876 1197±2 2.7
PPR DD T5 21./27 (HO) 1 x 49 5165 923 5170 923 5170 926 1497±2 3.7
PPR DD T5 21./29 (HO) 1 x 80 5165 973 5170 973 5170 976 1497±2 3.7
Further ballast units Watt El. bal. Multiwatt El. bal. DIM 1–10 V El. bal. DIM-DALI L Weight
for improved efficiency Art.-No. Art.-No. Art.-No. (mm) (kg)
Through-wiring 3x1.5 mm 2 3x1.5 + 2 x1.5 mm 2 3x1.5 + 2 x1.5 mm 2
PPR DD T5 1x 14/24 5165 522 5165 524 5165 525 597±2 1.8
PPR DD T5 1x 21/39 5165 742 5165 744 5165 745 897±2 2.2
PPR DD T5 1x 28/54 5165 822 5165 824 5165 825 1197±2 2.7
PPR DD T5 1x 35/49/80 5165 982 5165 984 5165 985 1497±2 3.7
Through-wiring 5 x1.5 mm 2 5 x1.5 + 2 x1.5 mm 2 5 x1.5 + 2 x1.5 mm 2
PPR DD T5 1x 14/24 5170 522 5170 524 5170 525 597±2 2.0
PPR DD T5 1x 21/39 5170 742 5170 744 5170 745 897±2 2.2
PPR DD T5 1x 28/54 5170 822 5170 824 5170 825 1197±2 2.9
PPR DD T5 1x 35/49/80 5170 982 5170 984 5170 985 1497±2 3.9
Also for special applications like the automotive 685 009
industry, for example – non-silicone designs optional
Maintenance-friendly XXL cover, L = 360 mm 692 210
Cable entry at the side 691 150
Cable entry at the ceiling side 691 151
RAL colours available at extra cost
Areas of application: Lighted ceilings, industrial halls, storage areas, maintenance halls, when high levels are needed, logistics centers, bus garages,
public transport, food industry, beverage industry, dairy operations.
Luminaire Apollo T5 with push-fit lampholder, Ø38 mm. Captive press-fit cover, super fast maintenance
owing to stainless steel press-fit cover clips.
L
*For versions with electronic ballast:
Identification
Luminaires must be operated
with covers in place!
126±2
60