Batten luminaires - Alfred Pracht Lichttechnik GmbH

Luminaire Rhodos T8
for FL T8/26 mm
single- and twin-lamp,
extremely flat design
10
*
Protection Class II according to VDE 0711/EN 60598
Ingress protection IP65
Dust-proof
Jet-proof
230V/50 Hz
Housing: Tubular housing, fully sealed, made of white, fiberglass-reinforced
polyester, essentially fully resistant against acids and alkalis.
Socket: Side sockets made of PBT, two-slot plug-in socket with silver-plated contacts.
Lamp cover: Batten luminaire, can be supplemented with accessories.
Seals: Short, age-resistant silicone seals.
Electrical components: Low loss ballast B1 starter; electronic ballast;
through-wiring max. 7 x 2.5 mm 2 .
Installation: Variable mounting points with Pracht Clip System made of stainless
steel. Suitable for ceiling, pendant and horizontal wall mounting.
70
±2
77±1
148±1
Befestigungslochabstand
Variable
variabel
mounting points
L
Listed with the
Deutsche Bahn AG
Type (VDE designation) Watt Inductive Compensated Electronic ballast L Weight
Art.-No. Art.-No. Art.-No. (mm) (kg)
Luminaire for individual and continuous mounting, single-lamp, extremely flat design, through-wiring 2 x 1.5mm 2
PPR SR 112/1 S 1 x 18 465 100 465 101 465 103 662±2 2.7
PPR SR 112/3 S 1 x 36 465 230 465 231 465 233 1272±2 3.0
PPR SR 112/5 S 1 x 58 465 360 465 361 465 363 1572±2 3.6
Luminaire for individual and continuous mounting, twin-lamp, extremely flat design, through-wiring 2 x 1.5 mm 2
PPR SR 112/2 S 2 x 18 465 130 465 131 465 133 662±2 2.7
PPR SR 112/4 S 2 x 36 465 260 465 261 465 263 1272±2 3.0
PPR SR 112/6 S 2 x 58 465 400 465 401 465 403 1572±2 3.6
Extra cost:
EVG Dim 1–10V (add to electronic ballast version) 685 004
EVG Dim Dali (add to electronic ballast version) 685 005
EVG Industrie (add to electronic ballast version) 36/58 685 006
Cable entry at the ceiling side 691 151
Through-wiring 4 x 1.5 mm 2 built-in 18 690 114
36 690 314
58 690 514
Note: Specular reflectors (HLR) can not be used on the Rhodos luminaire!
Accessories: See page 17
Areas of application: Lighting for structures with low ceilings, car parks, store rooms, transparent lighting, display cabinets.
Simple mains connection. Asymmetric FL layout, extremely flat.
*For versions with electronic ballast:
Identification
Luminaires must be operated
with covers in place!
70
±2
77±1
220±1
15
Batten luminaires
01with
reflectors