Mercedes-Benz SLR McLaren. Operator's Manual.

Control system
The control system is activated as soon as
the SmartKey in the starter switch is
turned to position 1. The control system
enables you to
call up information about your vehicle
change vehicle settings
For example, you can use the control system
to find out when your vehicle is next
due for service, to set the language for
messages in the instrument cluster display,
and much more.
Warning! G
A driver’s attention to the road and traffic
conditions must always be his/her primary
focus when driving.
For your safety and the safety of others, selecting
features through the multifunction
steering wheel should only be done by the
driver when traffic and road conditions permit
it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximately
14 m) every second.
The control system relays information to
the multifunction display.
Multifunction display
Controls in detail
Control system
The multifunction display consists of the
display fields in the speedometer and the
tachometer. In its default state, the left
display field shows the outside temperature
and main odometer, while the trip
odometer and the clock appears in the
right display field. This default setting is referred
to as the standard display.
Standard display
1 Main odometer
2 Outside temperature
3 Current gear selector lever position/gear
range
4 Trip odometer
5 Automatic transmission shift program
mode
6 Clock
117