Mercedes-Benz SLR McLaren. Operator's Manual.

Installation of infant and child restraint
systems
This vehicle is equipped with a tether anchorage
for a top tether strap behind the
passenger seat.
1 Cover of anchorage ring
To have better access to the anchorage
ring, move the passenger seat forward
( page 43).
Remove cover 1 in direction of the arrow
from anchorage ring 3.
Guide tether strap according to the
child restraint manufacturer’s instructions.
Make sure the tether strap is not
twisted.
2 Hook
3 Anchorage ring
Securely fasten hook 2, which is part
of the tether strap, to anchorage
ring 3.
i
For safety, make sure the hook has
attached to the ring beyond the safety
catch, as illustrated.
Safety and Security
Occupant safety
Move the passenger seat back as far to
the rear as possible.
Once the top tether anchorage hook is
attached, the child restraint itself can be
secured.
Properly secure the child restraint using
the passenger seat lap/shoulder
belt ( page 73) and tether anchorage
for top tether strap, fully in accordance
with the child restraint manufacturer’s
instructions.
Tighten the top tether strap according
to the child restraint manufacturer’s instructions.
Reinstall cover 1 after removing the
tether strap.
77