Mercedes-Benz SLR McLaren. Operator's Manual.

Information button ¡
The Information button ¡ is located in
the center armrest cover.
1 Information button ¡
Open the center storage compartment
( page 201).
Press and hold the button 1 (for longer
than 2 seconds).
A call to the Customer Assistance
Center will be initiated. The button will
flash while the call is in progress. The
message Connecting call will appear
in the multifunction display.
When the connection is established, the
message Call connected appears in the
multifunction display. The Tele Aid system
will transmit data generating the vehicle
identification number, model, color and location
(subject to availability of cellular
and GPS signals).
A voice connection between the Customer
Assistance Center representative and the
occupants of the vehicle will be established.
Information regarding the operation
of your vehicle, the nearest
Mercedes-Benz Center or Mercedes-Benz
USA products and services is available to
you.
For more details concerning the Tele Aid
system, please visit www.mbusa.com and
use your ID and password (sent to you separately)
to learn more (USA only).
Controls in detail
Useful features
i
The indicator lamp in the Information
button ¡ remains illuminated in red
for approximately 10 seconds during
the system self-check after switching
on the ignition (together with the SOS
button and the Roadside Assistance
button •).
See system self-check ( page 209) if
the indicator lamp does not come on in
red or stays on longer than approximately
10 seconds.
If the indicator lamp in the Information
button ¡ is illuminated continuously
and no voice connection to the
Response Center was established, then
the Tele Aid system could not initiate
an Information call (e.g. the relevant
cellular phone network is not available).
The message Call failed! appears
in the multifunction display.
Information calls can be terminated using
the ì button on the multifunction
steering wheel.
213