Mercedes-Benz SLR McLaren. Operator's Manual.

Do not overload the tires by exceeding the
specified load limit or vehicle capacity
weight as indicated on the placard on the
driver’s door B-pillar. Overloading the tires
can overheat them, possibly causing a
blowout.
Reactivating the tire inflation pressure
monitor
The tire inflation pressure monitor must be
reactivated in the following situations:
If you have changed the tire inflation
pressure
If you have replaced the wheels or tires
If you have installed new wheels or
tires
Using the tire placard on the driver’s
door B-pillar or, if available, the inside
of the fuel filler flap, make sure the tire
inflation pressure of all four tires is correct.
Press button k repeatedly until you
see the current tire inflation pressures
for each tire appear in the multifunction
display or the following message
appears in the multifunction display:
Tire pressure
displayed only
after driving
a few minutes
i
If you are transporting a deflated tire
and/or additional wheel sensors in the
vehicle, do not activate the tire inflation
pressure monitor until
the deflated tire and/or additional
wheel sensors are no longer in the
vehicle
you have inflated the tire to the
correct tire inflation pressure
Operation
Tires and wheels
Press the reset button on the instrument
cluster ( page 29).
The following message will appear in
the multifunction display:
Monitor current
tire pressure?
269