Master the Basics - VSM Group - Husqvarna Viking

More documents

Recommendations

Info

Feature Technique Benefit EASY THREADING & BOBBIN WINDING WORRY-FREE TENSION PERFECT REPEATING BUTTONHOLES FABRIC: Stretch Light tricot SELECT: Menu 1, Stitch 2 SEW: Line up the fabric fold with the 3/8” (10 mm) seam guide on stitch plate. FABRIC: Woven Heavy denim SELECT: Menu 1, Stitch 1 USE: Stitch Length 3.0 SEW: Fold denim in half (wrong sides together). Sew along the fold using 5/8” (15 mm) seam allowance. Fold the seam to one side. Topstitch down in place. Fold up raw edge twice to form a hem Sew hem in place Electronic foot control and penetration power of Husqvarna Viking Emerald 183 will handle any of your heavy duty projects: Hemming jeans Home dec Craft sewing with specialty fabrics Electronic power provides a greater penetration power even at slower speeds, whether stitching one stitch at a time or at full speed. SHOW: Built-in needle threader makes threading Threading the top thread. so easy. The built-in needle threader. Husqvarna Viking Emerald 183 has an easy threading system. See how easy it is to thread. SHOW: Where bobbin is wound. Bobbin stops winding when it is full. The bobbin stop. SHOW: Tension is set based on setting information found on Sewing Guide Reference Chart and InfoDisplay. Sample: Buttonhole samples on different types of fabrics FABRIC: Woven Medium chino and stabilizer SELECT: Buttonhole Stitch Menu 1, Stitch 0 Tension adjustment can be done easily for different types of fabrics and techniques. Automatic buttonhole foot can hold a button up to 1” (25 mm). Four buttonhole styles with the Husqvarna Viking Emerald 183. Buttonhole Slider Foot C sews both sides of the buttonhole in the same direction for Perfectly Balanced Buttonholes (PBB). © 2007 VSM Sewing Inc. HUSQVARNA®, VIKING®, DESIGNER®, and InfoDisplay are Emerald 183 registered trademarks. VSM Group AB or its licensors. All rights reserved. Printed in the USA Page 2 of 6 VER 11.15.07, CN MTB.3.28
Feature Technique Benefit PERFECT FABRIC FEEDING SERGING/ OVERCAST STITCHES USE: Buttonhole Slider Foot C SEW: Fold medium weight woven fabric in half with a piece of stabilizer between the layers. Attach the Buttonhole Slider Foot C. Slide the button holder to the back. Place the button holder to the back. Place the button in the adjustable measuring guide on the back of the foot. Push back the button holder back against the button to hold it tight. Position the fabric under the presser foot. Lower the buttonhole lever, and push it away from you. Hold the end of the upper thread and start sewing. The buttonholes are sewn from the front of the presser foot to the back. To sew another identical buttonhole, raise the presser foot, reposition, and repeat. Talk about the Husqvarna Viking Feeding System. FABRIC: Stretch Medium sweatshirt fleece and ribbing SELECT: Menu 1, Stitch 8 USE: Presser Foot B as shown on the InfoDisplay SEW: Cut a small neckline in a piece of Husqvarna Vikings have diamond point feed teeth. Moves the fabric evenly. Fabric will not get caught on feed teeth. Husqvarna Vikings have a box feeding system. Feed teeth move straight up, straight back, and straight down for the most efficient feeding of your project. Sew the seam and overcast the edge at the same time to prevent raveling of the seam allowance on a woven fabric. Creates a seam that will stretch on knit fabrics. Adjustable presser foot pressure makes it easy to accommodate all thicknesses and © 2007 VSM Sewing Inc. HUSQVARNA®, VIKING®, DESIGNER®, and InfoDisplay are Emerald 183 registered trademarks. VSM Group AB or its licensors. All rights reserved. Printed in the USA Page 3 of 6 VER 11.15.07, CN MTB.3.28
Page 1: A, B, Transparent B, Buttonhole Sli
Page 5 and 6: Feature Technique Benefit BUILT-IN

Master the Basics - VSM Group - Husqvarna Viking

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?