Simulating Tread Systems in Creo Elements/Pro 5.0

More documents

Recommendations

Info

Upon starting Creo, go to: File New Assembly. File New Creo opening window Assembly
Page 4 and 5: In Assembly, turn off datum planes,
Page 6 and 7: Press the assembly icon and go to:
Page 8 and 9: Press the assembly icon, and go to:
Page 10 and 11: Bring out dc_motor_mount_2011.prt a
Page 12 and 13: Bring out three axle_d-shaft_2011.p
Page 14 and 15: Change Applications from Standard m
Page 16 and 17: Define the sprocket’s servo motor
Page 18 and 19: Select the Belt icon in order to op
Page 20 and 21: To make the belt track an assembly
Page 22 and 23: In the form of the little spin cent
Page 24 and 25: Bring out the tt_link_asm_2011.asm
Page 26 and 27: Under the Point on Line constraint,
Page 28 and 29: Again, under the Point on Line cons
Page 30 and 31: Define tread link’s servo motor b
Page 32 and 33: Set up the graphical display for th
Page 34 and 35: Select Save in the Playbacks window
Page 36 and 37: In the Playback window, select Capt

Simulating Tread Systems in Creo Elements/Pro 5.0

Create successful ePaper yourself

Delete template?

Save as template?