Sibille Fameca Electric

More documents

Recommendations

Info

<strong>Sibille</strong>_EN_01_TOOL_ELEC_3_063-fin.qxd:Mise en page 1 13/01/10 15:18 Page 66 S t a t i o n / S w i t c h g e a r p r o t e c t i o n e q u i p m e n t 66 Safety products - Insulating platforms - TT018 - Insulating plastic exterior stool. Standard : Conforme aux spécifications EDF n°72 Use : Used to provide insulation for a technician during 1st category work or using hand controlled 2nd and 3rd category (cutters, switches, etc..). Plastic stool with anti-slip tray. Insulating feets in PVC, inclined in order to keep the platform away from contact with vertical casings. All stools are supplied with anti-slip pads. Weight/Dimensions : Dim 50 x 50 cm Réf. | Voltage | Screw on feets | Number of skirts | Height under platform (mm) | Weight kg TT018 24KV | 24 kV | x | 2 | 245 | 4,15 TT018 45KV | 45 kV | x | 3 | 362 | 4,60 TT018 63KV | 63 kV | x | 3 | 413 | 4,80 TT01 - Special wooden stool “electro emergency set” Use : Used to provide insulation for a technician during 1st category work or using hand controlled 2nd and 3rd category (cutters, switches, etc..). In hardwood, coated with waterproof varnish (2coats). Insulating feets in PVC, inclined in order to keep the platform away from contact with vertical casings. All stools are supplied with anti-slip pads. Réf. | Voltage | Fixed feets | dim (cm) | Height under platform(mm) | Weight kg TT01 | 25 kV | x | 33 x 46 | 147 | 3,15 - P r o t e c t i v e c o v e r s - TB05-TB10 - Protective cover Use : May be placed on the ground for assembly and laying out of all tools required for line and installation work. Linen cloth for protecting tools, fitter’s model Fireproof category M2 TB05 dim : 2 x 1 m - Weight 1,5 kg TB10 dim : 3 x 1 m - Weight 2,5 kg. Other dimensions available on request. TOOLS FOR ELECTRICIANS
<strong>Sibille</strong>_EN_01_TOOL_ELEC_3_063-fin.qxd:Mise en page 1 13/01/10 15:18 Page 67 TP105 - Insulating sleeve for low voltage conductor wire Use : Insulates live conductor wire up to 15mm diameter during wrk on or near the conductor To prevent sleeve from sliding on the conductor wire, use or plastic clips TP 60P. Made of rubber 3.3 mm thick. Insulates live conductor wire up to 15 mm dia. during work on or near the conductor. To prevent the sleeve from sliding on the conductor wire, use or plastic clips TP 60P Réf. | Length (m) TP105S 1 | 1 TP105 1,5M | 1,5 TP105 3M | 3 TP115 - Long length MV insulating sleeve Complies with norm EN 61479. Spiral profile. Assembly of several sleeves by notch. This sleeving is used when work in progress near category 1 installations wich are still live in order to prevent any risk of direct or indirect accidental contact (tools, scaffolding, ladders, objetcs) Réf. | Length (m) TP115 2,5M | 2,5 TP115 5M | 5 P85 - Notching pliers in forged alloy steel Pliers specially designed to make a T notch in TP115 insulating sleeves. Réf. | Length (mm) P85 | 160 G80 - Bibec sheathing guide in synthetic material Use : This tool with ahead at right angles to the sleeve has an 11 mm wide groove to guide and position TP115 sleeves on insulator wire. Réf. | Length (mm) G80 | 195 Safety products - Insulating sleeves and caps - TC15 - TC20 - Insulating cap for low voltage insulator Réf. |Diam (mm)| Height (mm)|Weight (kg)| Use TC15| 110 | 150 | 0,5 | for alignment insulator TC20| 162 | 200 | 1,3 |for backstay insulator (yoke) TOOLS FOR ELECTRICIANS S t a t i o n / S w i t c h g e a r p r o t e c t i o n e q u i p m e n t 67
Page 1 and 2:
Sibille Fameca Electric RN7 Sud Z.I
Page 3 and 4:
S t a n d a r d s a n d a d v i c e
Page 5:
B y p a s s a n d a c c e s s o r i
Page 8 and 9:
S t a n d a r d s a n d a d v i c e
Page 10 and 11:
I n s u l a t e d t o o l s - 1 0 0
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19: I n s u l a t e d t o o l s - 1 0 0
Page 22 and 23: S t a n d a r d s a n d a d v i c e
Page 66 and 67: Sibille_EN_01_TOOL_ELEC_3_063-fin.q
Page 106: Sibille_EN_01_TOOL_ELEC_3_063-fin.q
show all

Sibille Fameca Electric

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?