Sibille Fameca Electric

Sibille_EN_01_TOOL_ELEC_3_063-fin.qxd:Mise en page 1 13/01/10 15:19 Page 91
Switch cabinet Béroshunt 400 - Cabinet
Béroshunt 400
Use : The cabinet Beroshunt 400 is a network commutator in live used for
switching on or off an electrical circuit.
The switch is of 400 A nominal intensity. Associated to the screw on
connector M12.
It transits:
- 250 A with 50 mm2 HO7RNF equipped at each end of a screw on
connector CV250;
- 400 A with 50 mm2 HO7RNF equipped at each end of a screw on
connector CV400.
In compliance with EDF technical data BT 804.
Cabinet description
- 1 insulated cabinet type S300 conforms to HN 62 15 with locking door
and metallic
feet.
- 1 visible cut switch 400 A at lateral control, locking in opened position
conforms NFC 63-
130, CEI 947-3.
- 8 connecting sockets M12, IP2X receiving the 50 mm2 and 120 mm2
HO7RNF cables
equipped of screws on connectors CV250 or CV400 conforms to the
technical data
BT 823.
- 8 control terminals of the phase synchronization.
- 1 metallic holder (bracket) for fixing the cabinet on the pole.
- 2 ratchet straps for fixing the bracket.
- 1 ratchet strap equipped of 2 eyes for the holding of cables in raising.
Two types of rollers are offered in order to be associate at the cabinet
Beroshunt 400
Main use on overhead network
Insulated winder SFE3441 equipped of:
- 10 m of 50 mm2 HO7RNF with connector CV 250 at each top;
- 1 telescopic end fitting M12 TE51M12 (3361°) at the end of the cable
connecting to
the overhead network;
- 1 pulling grip with hook at one end of the cable allowing the hooking in
raising.
Main use on underground network
Insulated winder SFE3485 equipped of:
- 10 m of 120 mm2 HO7RNF with connector CV 400 at each top;
- 1 pulling grip with hook at one end of the cable allowing the hooking in
raising.
1
2
3
Switch cabinet Beroshunt 400A
- Switch cabinet Beroshunt 400A -
Réf. | Designation
SFE3440 | Béroshunt 400
SFE3441 | 10 m winder HO7RNF 50 mm2 with 2CV 250
| + telescopic end fitting TE51M12 (3361)
SFE3485 | 10 m winder HO7RNF 120 mm2 with 2CV 400
TOOLS FOR ELECTRICIANS
3
1
2
B y p a s s a n d a c c e s s o r i e s
91