Sibille Fameca Electric

Sibille_EN_01_TOOL_ELEC_3_063-fin.qxd:Mise en page 1 13/01/10 15:19 Page 88
B y p a s s a n d a c c e s s o r i e s
88
Screw on M12 connector, 200 and 400A
- Screw on M12 connector, 200 and 400A -
SFE3431 - Junction case BJV
In compliance with EDF Serect technical data BT 823.
These junction cases have from two to eight connecting sockets.
They maintain either a simple junction (two socket case) either a junction + a
diversion (2-4-8 socket cases).
Each socket has a protective cap.
All the sockets of a case are at the potential.
The cases are fully insulated and maintain the IP2X protection degree.
Réf. | Designation
SFE3431 | Junction box 2 sockets BJV 2 400
SFE3432 | Junction box 4 sockets BJV 4 400
SFE3433 | Junction box 6 sockets BJV 6 400
SFE3434 | Junction box 8 sockets BJV 8 400
TB08 - Junction case CV-cable 50 to 240 mm 2
(3439)
In compliance with EDF Serect technical data BT 824.
That junction enables to realize a junction between a flexible cable HO7RNF
equipped of screw on
connector and a 50 to 240 mm2 alu. or copper ordinary cable.
The 50 to 240 mm2 cable is connected by mechanical tightening with a male
key H6.
A window allows to check the right position of the cable before tightening.
The junction case is fully insulated and maintains the IP2X protection degree.
- A c c e s s o r i e s f o r s c r e w o n M 1 2 c o n n e c t o r s -
SFE3389 - Female adapter M8/M12 (In = 200A)
In compliance with EDF BT 824, that insulated metallic piece has:
- 1 thread top M12 for screw on connector;
- 1 thread top M8;
- 1 hole H6 on the side for locking or unlocking the entrance piece.
That adapter is fixed on the thread rods M8 equipping the apparatus.
TOOLS FOR ELECTRICIANS