Advanced Welding Processes: Technologies and Process Control

References 267
[40] Anon, 1989 ‘Sahara ReadyPack’, Smitweld Reportage, No. 3, September.
[41] Farrar J C M, 1990 ‘Developments in stainless steel welding consumables’, Weld
Metal Fabric, 58(1).
[42] Thornton C E, 1988 ‘Submerged arc welding consumables for high toughness
applications’, Weld Metal Fabric, 56(7).
[43] Taylor D S and Thornton C E, 1989 Weld Rev, 8(3).
[44] Fraser R et al., 1982 ‘High deposition rate submerged arc welding for critical
applications’, Proc 2nd int conf on Offshore Welded Structures, Cambridge, The
Welding Institute, paper 12.
[45] Troyer W and Mikurak J, 1974 ‘High deposition submerged arc welding with
iron powder joint fill’, Weld J, 53(8).
[46] Kohno A and Barlow J A, 1982 ‘Improved submerged arc productivity with metal
powder additions’, Weld Inst. Res Bull, December.
[47] Paranhos R, 1991 ‘A numerical method for welding parameter prediction and
optimisation’, PhD thesis, Cranfield Institute of Technology.
[48] McKeown D, 1990 ‘Trends and developments in MIG welding consumables’,
Weld Metal Fabric, 58(1).
[49] Lesnewich A, 1955 ‘Electrode activation for inert gas metal arc welding’, Weld J,
34(12).
[50] Mistry H R, 1986 ‘Effects of wire and shielding gas composition on the toughness
of pulsed MIG welds in HSLA steel’, MSc thesis, Cranfield Institute of Technology.
[51] Norrish J, Slater G and Cooper P, ‘Particulate fume distribution and breathing
zone exposure in gas metal arc welding’, Proc Int Conf Health and Safety in
Welding and Allied Processes, 9–11th May 2005, Force Technology, Copenhagen,
Denmark.
[52] Rodgers K J and Lochhead J C, 1987 ‘Self-shielded flux cored arc welding – the
route to good fracture toughness’, Weld J, July.
[53] Sandham J, 1987 ‘A comparative study of synergic pulsed MIG and tubular
electrode GMAW, MSc thesis, Cranfield Institute of Technology.
[54] Widgery D J, 1988 ‘Flux-cored wire: an update’, Weld Metal Fabric, 56(3).
[55] Yamamuchi N and Taka T, 1979 ‘TIG arc welding with hollow tungsten electrodes’,
Int Inst Weld Doc, 212-452-79.
[56] Al-Rawe A, 1991 Welding and Joining Technology, MPhil, SIMS, Cranfield
Institute of Technology.
[57] Lancaster J F, 1987 The Metallurgy of Welding, 4th edn, London: Allen and
Unwin.
[58] Allum C J, 1987 ‘Nitrogen absorption from welding arcs’, Int Inst Weld Doc,
212-659-86.
[59] Norrish J and Alfaro S A, unpublished.
[60] Norrish J, Hilton D E and Mistry H R, 1986 ‘The effect of shielding gas composition
in the MAG welding of line pipe’, Proc 3rd int conf on The Welding and Performance
of Pipelines, The Welding Institute, London, 18–21 November, paper 19.
[61] Stenbacka N and Svennson O, 1987 ‘Some observations of pore formation in gas
metal arc welding’, Scand J Metall, 16.
[62] Scheibner P, 1979 ‘Results of investigations on the formation of spatter during
metal active gas arc welding in the GDR’, Int Inst Weld Doc, XII-B-271-79.
[63] Norrish J, 1974 ‘High deposition MIG welding with electrode negative polarity’,
Proc 3rd conf on Advances in Welding Processes, Cambridge: The Welding Institute,
paper 16.