Advanced Welding Processes: Technologies and Process Control

References 273
[178] Benn B, 1988 ‘Joining technology at Rolls Royce PLC, Bristol’, Weld Metal
Fabric, 56(6).
[179] Nightingale K R, 1983 ‘Electron beam welding of copper and its alloys’, Weld
Inst Res Bull, 24(1).
[180] Russell J D, 1981 ‘Electron beam welding – a review’, Metal Construct, 13(7).
[181] Malin V Y, 1983 ‘The state-of-the-art of narrow gap welding Weld J, 62(6).
[182] Foote W, 1987, PhD thesis, Cranfield Institute of Technology.
[183] Farish E, 1989 ‘Modelling the GTAW process with cold wire addition’, MSc
thesis, Cranfield Institute of Technology.
[184] Randall M D and Nelson J W, 1979 ‘CRC automatic welding system’, Proc Conf
Recent Developments in Pipeline Welding, Cambridge, The Welding Institute.
[185] Meister R P et al., 1966 ‘Narrow gap welding process’, Br Weld J, 13(5).
[186] Modenesi P, 1990 ‘Statistical modelling of narrow gap gas metal arc welding
process’, PhD thesis, Cranfield Institute of Technology.
[187] Kimura S et al., 1979 ‘Narrow gap gas metal arc welding process in the flat
position’, Weld J.
[188] Nakayama M and Arikana M, 1975 ‘Development and application of narrow gap
arc welding processes in Japan’, Weld World, 13(9/10).
[189] Alfaro S 1989 ‘Mathematical modelling in narrow gap submerged arc welding’,
PhD thesis, Cranfield Institute of Technology.
[190] Alfaro S C A and Apps R L A, 1989 ‘Mathematical modelling of narrow gap
submerged arc welding’, Proc int conf on Joining of Materials, JOM-4, Helsingor,
Denmark, 19–22 March.
[191] de Altamer A, 1980 ‘Submerged arc narrow gap welding’, Metal Construct,
12(10).
[192] Hirai et al., 1981 ‘Application of narrow gap submerged arc welding to fabrication
of 2.25%Cr–1%Mo forged steel heat exchangers’, Int Inst Weld Doc, XIIA-009-
81.
[193] Lochead J C, 1983 ‘Narrow gap welding’, Proc Joint Conf South African Institute
of Welding and Institute of Mechanical Engineers, Welding and the Engineer, the
Challenge of the 80s.
[194] Kennedy N A, 1986 ‘Narrow gap submerged arc welding of steel; Part 1
Applications’, Metal Construct 18(11).
[195] Ellis D J, 1988 ‘Mechanised narrow gap welding of ferritic steel’, Join Mater,
1(2).
[196] Curtis G, Lovegrove G L and Farrar R A, 1990 ‘WASPS’ – an advisory system
for welding process selection’, Weld Metal Fabric, 58(1).
[197] Hicks J, 1979 A Guide to Designing Welds, Cambridge, Abington Publishing.
[198] British Standards Institution, 1986 BS 4871, Specification for approval testing of
welders working to approved welding procedures; 1986 BS 4872, Specification
for approval testing of welders when welding procedure approval is not required.
[199] Queen D M, 1989 ‘The evaluation and implementation of a computerised welding
procedure database management system’, Shell Expro.
[200] Robinson P, Private communication.
[201] Smith D S, 1988 ‘Control of MMA welding in practice – a user’s view’, Who’s
In Control seminar, Cranfield Institute of Technology, 25–26 May.
[202] Smith C J, 1988 ‘The calibration of welding equipment’, Who’s in Control seminar,
Cranfield Institute of Technology, 25–26 May.