Advanced Welding Processes: Technologies and Process Control

274
References
[203] Norrish J, 1988 ‘Computer based instrumentation for welding’, Proc Conf Computer
Technology in Welding, The Welding Institute, Cambridge, 8–9 June.
[204] Nixon J H N, 19XX Instrumentation for Arc Welding, Cranfield, Cranfield Institute
of Technology.
[205] Chawla K C, 1991 A General Purpose PC Based Welding Data Logger, Cranfield,
Cranfield Institute of Technology.
[206] Robinson P and Rogers P F, 1989 Measurement of welding current, Join Mater,
July 2(7).
[207] Kuszleyko R, 1979 ‘An objective solution of the welding process stability
evaluation’, Int Inst Weld Doc, XII-F208-79.
[208] Duncan A, 1980 ‘Evaluation of power sources for manual metal arc welding by
use of stability criteria’, MSc thesis, University of Aston, Birmingham.
[209] Carrer A, 1960 ‘Dynamic behaviour of DC generators for arc welding’, Br Weld
J, January.
[210] Buki A and Gorenshtein I M, 1967 ‘The stability and self adjustment of metal
deposition with short circuits of the arc gap’, Autom Weld, 11.
[211] Lucas W and Butler M, 1981 ‘An evaluation of minicomputer techniques for data
acquisition and analysis in arc welding process research’, Weld Inst Res Rep,
134/1981.
[212] Batson M S, 1981 ‘Effect of gas composition on arc stability during the short
circuit welding of stainless steel’, MSc thesis, University of Aston, Birmingham.
[213] Norrish J, Holmberg L and Hilton D E, 1989 ‘Optimisation of argon, oxygen,
carbon dioxide gas mixtures for the GMA welding of plain carbon steel’, Proc Int
Conf on the Joining of Materials, JOM-4, Helsingor, Denmark 19–22 March.
[214] Weinschenk H E and Schellhase M, 1979 ‘Statistical analysis of arcing voltage
in the CO 2 shielded welding process’, Proc Conf Arc Physics and Weld Pool
Behaviour, The Welding Institute, London, 8–10 May.
[215] Gupta S R, Gupta P C and Rehfeldt D, 1988 ‘Process stability and spatter generation
during dip transfer in MAG welding’, Int Inst Weld Doc, 212-710-88.
[216] Shinoda T, Kaneda H and Takeuchi Y, 1989 ‘An evaluation of short circuiting
phenomena in GMA welding’, Weld Metal Fabric, 57(10).
[217] Mita T, Sakabe A and Yokoo T, 1988 ‘Quantitative estimates of arc stability for
CO 2 gas shielded arc welding’, Weld Int, (2).
[218] Budai P, 1988 ‘Measurement of drop transfer stability in weld processes with
short circuiting drop transfer’, Int Inst Weld Doc, 212-711-88.
[219] Andrews D R and Broomhead J H W, 1975 ‘Quality assurance for resistance spot
welding’, Weld J, June.
[220] Broomhead J H W and Dony P H, 1990 ‘Resistance spot welding quality assurance’,
Weld Metal Fabric, 58(6).
[221] Rashid O A F, Hodgson D C and Broomhead J H W, 1983 ‘A microprocessor
based monitor for the resistance welding of mild steel and aluminium’, Proc Int
Conf Development and innovation for improved welding production, Birmingham,
UK, September 1983.
[222] Janota M and Kuban J, 1985 ‘Adaptive systems of process control for spot welding
robot cells’, Proc Conf Automation and Robotisation in Welding and Allied
Processes, Strasbourg, Oxford: Pergamon.
[223] Crookall J R and Philpott M L, 1984 ‘Direct arc sensing adaptive quality control
of MIG welding robots’, Proc 3rd SERC Robotics Initiative Conference, University
of Surrey.