26.03.2013 Views

Y-IM-Single Package AC and Single Package Gas/Electric Units ...

Y-IM-Single Package AC and Single Package Gas/Electric Units ...

Y-IM-Single Package AC and Single Package Gas/Electric Units ...

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

127083-Y<strong>IM</strong>-B-0606<br />

Excessive exposure of this furnace to contaminated<br />

combustion air may result in equipment damage or<br />

personal injury. Typical contaminates include: permanent<br />

wave solution, chlorinated waxes <strong>and</strong> cleaners,<br />

chlorine based swimming pool chemicals, water<br />

softening chemicals, carbon tetrachloride, Halogen<br />

type refrigerants, cleaning solvents (e.g. perchloroethylene),<br />

printing inks, paint removers, varnishes,<br />

hydrochloric acid, cements <strong>and</strong> glues, antistatic fabric<br />

softeners for clothes dryers, masonry acid washing<br />

materials.<br />

RIGGING AND HANDLING<br />

Exercise care when moving the unit. Do not remove any<br />

packaging until the unit is near the place of installation. Rig<br />

the unit by attaching chain or cable slings to the lifting holes<br />

provided in the base rails. Spreader bars, whose length<br />

exceeds the largest dimension across the unit, MUST be<br />

used across the top of the unit.<br />

If a unit is to be installed on a roof curb other than a<br />

YORK roof curb, gasketing must be applied to all<br />

surfaces that come in contact with the unit underside.<br />

Before lifting, make sure the unit weight is distributed<br />

equally on the rigging cables so it will lift evenly.<br />

<strong>Units</strong> may be moved or lifted with a forklift. Slotted openings<br />

in the base rails are provided for this purpose.<br />

LENGTH OF FORKS MUST BE A MIN<strong>IM</strong>UM OF 60<br />

INCHES.<br />

All panels must be secured in place when the unit is<br />

lifted.<br />

The condenser coils should be protected from rigging<br />

cable damage with plywood or other suitable<br />

material.<br />

TABLE 3: UNIT WEIGHT<br />

Unitary Products Group 11<br />

Model<br />

Shipping 1<br />

Weight (lbs.)<br />

1. Weights include largest heating option.<br />

2.<br />

8 tube gas section.<br />

3. 54kW heater.<br />

Operating<br />

Weight (lbs.)<br />

DF078 1058 1053<br />

DF090 875 870<br />

DF102 888 883<br />

DF120 1190 1185<br />

ECON. 85 84<br />

PE 150 148<br />

GAS HEAT 2<br />

110 100<br />

ELEC. HEAT3 49 49<br />

FIGURE 5 - UNIT 4 POINT LOAD<br />

TABLE 4: 4 POINT LOAD WEIGHT<br />

Model<br />

)<br />

- . 6<br />

Location (lbs.) 1<br />

A B C D<br />

DF078 231 197 288 337<br />

DF090 195 146 228 306<br />

DF102 197 147 230 309<br />

DF120 260 222 324 379<br />

1. Weights include largest heating option.<br />

TABLE 5: 6 POINT LOAD WEIGHT<br />

,<br />

Location (lbs.)<br />

Model<br />

A B C D E F<br />

DF078 158 142 128 187 207 231<br />

DF090 137 112 93 145 175 214<br />

DF102 138 113 93 146 175 216<br />

DF120 178 160 144 210 233 260<br />

*<br />

. 4 6<br />

+

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!