The Source Integrity Professional Edition User Guide - MKS

Starting a Change Integrity Session
1. In the Server field, enter the name of the server you want to
connect to, for example, localhost, or the numerical IP address,
for example, 1.234.53.
Note Do not use back slashes (\) in the server name, for example,
\\localhost.
2. In the Port field, enter the server’s port number, for example,
7001.
3. In the Name field, enter your user name, for example, gmiller.
User names must be a minimum of one character.
4. In the Password field, enter your password, for example,
docsteam. Passwords must be a minimum of eight characters.
5. To save your password for every time you log in, select the
Remember My Password checkbox.
Note User names and passwords are assigned by your administrator—
you should contact your administrator for the correct entries.
6. To accept the log in information, click OK. To close the MKS
Change Integrity login dialog box, click Cancel.
Change Integrity validates your login information, then the
Change Integrity graphic user interface appears.
To log in using the Web interface:
1. Start your Web browser, such as Netscape Navigator or Microsoft
Internet Explorer.
2. Browse to the location of the Change Integrity home page. Your
administrator can provide you with its location.
A typical URL of the Change Integrity home page may be of the
form:
http://server_name:port_#/
User Guide 315