OPERATION / SERVICE MANUAL - Midmark
OPERATION / SERVICE MANUAL - Midmark
OPERATION / SERVICE MANUAL - Midmark
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
22<br />
IQmark Digital Spirometer Operation Manual<br />
Placing a check mark in the Primary Care Practitioner (PCP) Mode box with another<br />
profile selected (not PCP Mode) will enable test grading, remove VC and MVV from the<br />
test screen but will not limit the measurement parameters displayed. This allows you to<br />
customize the report if desired. To remain in the PCP Mode without customization,<br />
simply select the PCP Mode from the Configuration Profile box.<br />
Measurements Tab<br />
This tab enables you to customize which measurements you want to appear on the cover<br />
page, the test screen and the review screen. You must select at least one measurement.<br />
If you have selected the Tables and Graphs setting for your Cover Page, the cover<br />
page report displays only the first 9 measurements selected. If Table Only is selected, the<br />
cover page displays up to 28 measurements.<br />
Spirometry Settings – Measurement Tab<br />
You can place the measurements in any order you wish by using the Add, Insert, and<br />
Remove buttons. Highlight the measurement with your mouse and then choose the<br />
desired function.<br />
Choose the Add button to place the newly selected Available Measurements<br />
at the bottom of the Selected Measurements list.<br />
Choose the Insert button to place the newly selected Available<br />
Measurements above the currently highlighted item in the Selected<br />
Measurements list.