TigerSwitch 10/100 - SMC

Configuration Options
CHAPTER 1
SWITCH MANAGEMENT
For advanced management capability, the TigerSwitch 10/100
management agent provides a menu-driven system configuration
program. This program can be accessed by a direct or modem
connection to the serial port on the rear panel (out-of-band), or by
a Telnet connection over the network (in-band).
The management agent is based on SNMP (Simple Network
Management Protocol). This SNMP agent permits the switch to be
managed from any PC in the network using in-band management
software (such as SMC’s EliteView).
The management agent also includes an embedded HTTP Web
agent. This Web agent can be accessed using a standard Web
browser from any computer attached to the network.
The system configuration program and the SNMP agent support
management functions such as:
Enable/disable any port
Set the communication mode for any port
Configure SNMP parameters
Configure VLANs or multicast filtering
Display system information or statistics
Configure the switch to join a Spanning Tree
Download system firmware
Restart the system
1-1