TigerSwitch 10/100 - SMC

Console Login Configuration
USING THE SYSTEM CONFIGURATION PROGRAM
Use the Management Setup: Console Login Configuration to restrict
management access based on specified user names and
passwords, or to set the invalid password threshold and time-out.
There are only two user types defined, ADMIN (Administrator) and
GUEST, but you can set up to five different user names and
passwords. Only Administrators have write access for parameters
governing the switch. You should therefore assign a user name
and password to the default Administrator as soon as possible, and
store it in a safe place. (If for some reason your password is lost,
or you cannot gain access to the System Configuration Program,
contact SMC Technical Support for assistance.) The parameters
shown on this screen are indicated in the following figure and
table.
Console Login Configuration
===========================
Password Threshold : 3
Lock-out Time (in minutes) : 0
User Type User Name Password
----------------------------------------
1. ADMIN admin
2. GUEST guest
3.
4.
5.
Use or arrow keys to move, other keys to make changes.
2-21