TigerSwitch 10/100 - SMC
TigerSwitch 10/100 - SMC
TigerSwitch 10/100 - SMC
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Menu Description<br />
Console Login<br />
Configuration<br />
Changing the Network Configuration<br />
USING THE SYSTEM CONFIGURATION PROGRAM<br />
Sets user names and passwords for system<br />
access, as well as the invalid password<br />
threshold and lockout time.<br />
TFTP Download Downloads new version of firmware to<br />
update your system (in-band).<br />
Configuration Save<br />
& Restore<br />
Saves the switch configuration to a file on a<br />
TFTP server. This file can be later<br />
downloaded to restore the configuration.<br />
Use the Network Configuration menu to set the bootup option,<br />
configure the switch’s Internet Protocol (IP) parameters, enable the<br />
on-board Web agent, or to set the number of concurrent Telnet<br />
sessions allowed. The screen shown below is described in the<br />
following table.<br />
Network Configuration<br />
=====================<br />
IP Configuration ...<br />
IP Connectivity Test (Ping) ...<br />
HTTP Configuration ...<br />
MAX Number of allowed Telnet sessions (1 -4) : 4<br />
MAC Address : 00-E0-29-52-28-00<br />
<br />
Use or arrow keys to move. to select.<br />
Parameter Description<br />
IP Configuration Screen used to set the bootup option, or<br />
configure the switch’s IP parameters.<br />
IP Connectivity Test (Ping) Screen used to test IP connectivity to a<br />
specified device.<br />
HTTP Configuration Screen used to enable the Web agent.<br />
2-11