TigerSwitch 10/100 - SMC

Menu Description
Extended Bridge
Configuration
USING THE SYSTEM CONFIGURATION PROGRAM
Displays/configures extended bridge
capabilities provided by this switch.
802.1P Configuration Configures default port priorities and queue
assignments.
802.1Q VLAN
Base Information
802.1Q VLAN Current
Table Information
802.1Q VLAN Static Table
Configuration
802.1Q VLAN
Port Configuration
Port Security
Configuration
Displays basic VLAN information, such as
VLAN version number and maximum VLANs
supported.
Displays VLAN groups and port members.
Configures VLAN groups via static
assignments, including setting port members,
or restricting ports from being dynamically
added to a port by the GVRP protocol.
Displays/configures port-specific VLAN
settings, including PVID, ingress filtering, and
GVRP.
Allows you to enable and configure port
security for the switch.
Port GARP Configuration* Configures settings used in multicast filtering.
Port GMRP Configuration* Configures GMRP multicast filtering.
Network Monitor Menu
Port Statistics Displays statistics on network traffic passing
through the selected port.
RMON Statistics Displays detailed statistical information for the
selected port such as packet type and frame
size counters.
Unicast Address Table Provides full listing for unicast addresses, as
well as search and clear functions.
Multicast Address Provides full listing for multicast addresses, as
Registration Table* well as search and clear functions.
IP Multicast Registration Displays all the multicast groups active on this
Table
switch, including multicast IP addresses and
corresponding VLAN IDs.
Static Unicast Address Used to manually configure host MAC
Table Configuration addresses in the unicast table.
2-5