TigerSwitch 10/100 - SMC
TigerSwitch 10/100 - SMC
TigerSwitch 10/100 - SMC
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Downloading System Software<br />
USING THE SYSTEM CONFIGURATION PROGRAM<br />
Using TFTP to Download Over the Network<br />
Use the TFTP Download menu to load software updates into the<br />
switch. The download file should be an <strong>SMC</strong>6912M/24M binary file<br />
from <strong>SMC</strong>; otherwise the agent will not accept it. The success of<br />
the download operation depends on the accessibility of the TFTP<br />
server and the quality of the network connection. After<br />
downloading the new software, the agent will automatically restart<br />
itself. Parameters shown on this screen are indicated in the<br />
following figure and table.<br />
TFTP Download<br />
=============<br />
Download Server IP :<br />
Agent Software Upgrade : ENABLED<br />
Download Filename :<br />
Download Mode : PERMANENT<br />
[Process TFTP Download]<br />
Download status : Complete<br />
<br />
Use or arrow keys to move. Other keys to make changes.<br />
Parameter Description<br />
Download Server IP<br />
Agent Software Upgrade<br />
IP address of a TFTP server.<br />
Download Filename The binary file to download.<br />
Download Mode Download to permanent flash ROM.<br />
Note: You can also download firmware using the Web agent<br />
(page 3-16) or by a direct console connection after a restart<br />
(page A-2).<br />
2-23