TigerSwitch 10/100 - SMC

USING THE SYSTEM CONFIGURATION PROGRAM
Displaying the Current Bridge STA
The parameters shown in the following figure and table describe
the current Bridge STA Information.
Spanning Tree Information : Bridge STA Information
==================================================
Priority : 32768
Hello Time (in seconds) : 2
Max Age (in seconds) : 20
Forward Delay (in seconds): 5
Hold Time (in seconds) : 1
Designated Root : 128.0000E800E800
Root Cost : 501
Root Port : 1
Reconfig Counts : 3
Topology Up Time : 48069 (0 day, 1 hr, 2min, 34 sec)
Use or arrow keys to move, to select.
Parameter Description
Priority Device priority is used in selecting the root device,
root port, and designated port. The device with the
highest priority becomes the STA root device.
However, if all devices have the same priority, the
device with the lowest MAC address will then
become the root device.
Hello Time The time interval (in seconds) at which the root
device transmits a configuration message.
Max Age The maximum time (in seconds) a device can wait
without receiving a configuration message before
attempting to reconfigure.
Forward Delay The maximum time (in seconds) the root device will
wait before changing states (i.e., listening to learning
to forwarding).
Hold Time The minimum interval between the transmission of
consecutive Configuration BPDUs.
Designated Root The priority and MAC address of the device in the
Spanning Tree that this switch has accepted as the
root device.
2-35